You did a trick without even knowing about it. The waves are not synchronized.
In other words, they don't start in the same place. TimSent from Samsung tablet
-------- Original message --------From: Richard Ellis <rchrd.ell...@gmail.com>
Date: 8/20/19 9:54 AM (GMT-08:00) To: Legacy Ornamental Mills
<legacy-ornamental-mills@googlegroups.com> Subject: Re: TK Reciprocater long
curves Here is a pic of the curves There are five curves and I was thinking of
putting a straight groove in between. All good practice !!On Tuesday, August
20, 2019 at 10:52:58 AM UTC+1, aussiman wrote:Looks good so far Bill From:
legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> On Behalf Of
Richard EllisSent: Tuesday, 20 August 2019 4:59 PMTo: Legacy Ornamental Mills
<legacy-orna...@googlegroups.com>Subject: Re: TK Reciprocater long curves Just
taken a quick pic of the basic (start ) of a coat and hat stand.It is 38 inches
long X2 inch dia. May decde to make dia smaller !!! It of course only approx
half of the stand height.The four inch TK curve will be spaced eqidistance
around the dia. but will have a straight flute between each curve,Will take
more pics Later if time permits !!??On Tuesday, August 20, 2019 at 7:09:38 AM
UTC+1, Richard Ellis wrote:Hi Bill Tim & CurtI will have to settle for a 4 inch
curve When I have time to change the TK to the 2X .Need a different gear set up
for anything longer ( Not LOM )I will update you when I take a pic of the wood
I am using and it's purpose also the dimensions.Bit too busy at the present
time to do much with the Revo or 900.RichardOn Sunday, August 18, 2019 at
5:38:02 PM UTC+1, Curt George wrote:Here is the longest pitch with a wave that
I have done. Is this like what you want to make?C.A.G.On Sunday, August 18,
2019, 11:12:04 AM EDT, 'Curt George' via Legacy Ornamental Mills
<legacy-orna...@googlegroups.com> wrote: Good morning.Richard, What router
bit are you using? What Tim and Bill already said are correct. but the type of
cut you make also makes the wave look different. depending on the diameter of
the work piece and the cutter's size, as well as the depth of your cut will
give you different looks. And also will the method of cutting. (Cutting for the
top vs cutting form the side of the wood will also change the look.) Here are a
few different looks you can get with a long pitch and different cutters. C.A.G.
On Sunday, August 18, 2019, 07:53:29 AM EDT, <bulk...@mmnet.com.au> wrote:
If I remember correctly the wave or zigzag the biggest you can achieve as it
travels along is around 90 degrees so virtually no degrees to 90. But the pitch
how long the waves are governed by the pitch just the same as spirals are so
do some waves at different pitches and see, so my guess would be yes 2x would
give 4 inch . please report how you go I would be greatly interested to see,
if it wasn’t so dam cold here out in the shop I would try a few and report
back. Bill From: legacy-orna...@googlegroups.com
<legacy-orna...@googlegroups.com> On Behalf Of Richard EllisSent: Sunday, 18
August 2019 7:47 PMTo: Legacy Ornamental Mills
<legacy-orna...@googlegroups.com>Subject: TK Reciprocater long curves Hi all
you LOM expertsI am trying to do a long (approx ) 6 inch flute with the TK at
present with the standard index gear I get a 2 inch point to point curve If I
change to the 2X gear I think it will only give me a four inch point to point
--- I have not tried but it's my guess !!Am I trying to do the
impossible???Richard-- You received this message because you are subscribed to
the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this
group and stop receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/e560996b-0be6-44a0-8bf9-abf99146f57c%40googlegroups.com.
Virus-free. www.avast.com -- You received this message because you are
subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe
from this group and stop receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d555bb%24878d08f0%2496a71ad0%24%40mmnet.com.au.--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.To unsubscribe from this group and stop
receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/762244031.589832.1566141100017%40mail.yahoo.com.--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.To unsubscribe from this group and stop
receiving emails from it, send an email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.to view this discussion on
the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/02923194-a11a-4804-8ac2-cd41967adfb1%40googlegroups.com.
Virus-free. www.avast.com
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/5ed55d80-e6fa-4977-a6bb-61459f288955%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d5c727b.1c69fb81.cc358.7472SMTPIN_ADDED_MISSING%40gmr-mx.google.com.
