Thanks for your help, Jonh and Roy! I've tried to configure with these options DIM=3 --enable-2D-only=no\, (was --enable-2D-only=no) but the errors remain.
2008/5/30 John Peterson <[EMAIL PROTECTED]>: > On Fri, May 30, 2008 at 11:56 AM, John Peterson <[EMAIL PROTECTED]> > wrote: > > Hi, > > > > I haven't personally seen these errors before. I might take a look > > into the autoconf documentation as is suggested and see if anything > > promising pops up. > > > > As to your other problem, I don't see anything particularly sinister > > about line 389 of the type_vector.h file (in the SVN head). I'll take > > a look at the 0.6.2 version momentarily and see if anything else pops > > out. > > OK, I take that back. > > In 0.6.2 that line is an error() which can only occur if the code has > been compiled with DIM < 3. This is likely a bug on our part, because > we rarely compile with DIM=2, which I assume you did? A quick fix > might be to re-configure with DIM=3 and see if the seg-fault goes > away. > > -J > > > > > > > > > > On Fri, May 30, 2008 at 11:42 AM, Dmitry Matison <[EMAIL PROTECTED]> > wrote: > >> Hello! > >> I'm using libmesh via cygwin and have a problem with configure > procedure. > >> Have someone handled with these errors? > >> > >> checking dlfcn.h usability... no > >>> checking dlfcn.h presence... yes > >>> configure: WARNING: dlfcn.h: present but cannot be compiled > >>> configure: WARNING: dlfcn.h: check for missing prerequisite > headers? > >>> configure: WARNING: dlfcn.h: see the Autoconf documentation > >>> configure: WARNING: dlfcn.h: section "Present But Cannot Be > Compiled" > >>> configure: WARNING: dlfcn.h: proceeding with the preprocessor's result > >>> configure: WARNING: dlfcn.h: in the future, the compiler will take > >>> precedence > >>> configure: WARNING: ## ------------------------------------------ > ## > >>> configure: WARNING: ## Report this to the AC_PACKAGE_NAME lists. > ## > >>> configure: WARNING: ## ------------------------------------------ > ## > >>> checking for dlfcn.h... yes > >>> > >>> checking rpc/rpc.h usability... no > >>> checking rpc/rpc.h presence... yes > >>> configure: WARNING: rpc/rpc.h: present but cannot be compiled > >>> configure: WARNING: rpc/rpc.h: check for missing prerequisite > headers? > >>> configure: WARNING: rpc/rpc.h: see the Autoconf documentation > >>> configure: WARNING: rpc/rpc.h: section "Present But Cannot Be > Compiled" > >>> configure: WARNING: rpc/rpc.h: proceeding with the preprocessor's > result > >>> configure: WARNING: rpc/rpc.h: in the future, the compiler will take > >>> precedence > >>> configure: WARNING: ## ------------------------------------------ > ## > >>> configure: WARNING: ## Report this to the AC_PACKAGE_NAME lists. > ## > >>> configure: WARNING: ## ------------------------------------------ > ## > >>> checking for rpc/rpc.h... yes > >>> checking for xdrstdio_create... no > >> > >> > >> Another problem is that I can't run the examples because of these > errors: > >> > >> $ ./ex0-opt.exe > >>> [0] > /cygdrive/d/projects/vs/libmesh-0.6.2/include/numerics/type_vector.h, > >>> line 389, compiled May 29 > >>> 2008 at 18:30:27 > >>> Aborted (core dumped) > >> > >> > >> > >> > >>> $ ./ex4-opt -d 1 -n 20 > >>> Running ./ex4-opt -d 1 -n 20 > >>> > >>> Mesh Information: > >>> mesh_dimension()=1 > >>> spatial_dimension()=2 > >>> n_nodes()=41 > >>> n_elem()=20 > >>> n_local_elem()=20 > >>> n_active_elem()=20 > >>> n_subdomains()=1 > >>> n_processors()=1 > >>> processor_id()=0 > >>> > >>> EquationSystems > >>> n_systems()=1 > >>> System "Poisson" > >>> Type "LinearImplicit" > >>> Variables="u" > >>> Finite Element Types="LAGRANGE", "JACOBI_20_00" > >>> Infinite Element Mapping="CARTESIAN" > >>> Approximation Orders="SECOND", "THIRD" > >>> n_dofs()=41 > >>> n_local_dofs()=41 > >>> n_constrained_dofs()=0 > >>> n_vectors()=1 > >>> > >>> [0] > /cygdrive/d/projects/vs/libmesh-0.6.2/include/numerics/type_vector.h, > >>> line 389, compiled May 29 > >>> 2008 at 18:30:27 > >>> Aborted (core dumped) > >>> > >> > >> > >> $ ./ex6-opt > >>> Running ex6 with dim = 3 > >>> > >>> [0] > /cygdrive/d/projects/vs/libmesh-0.6.2/include/numerics/type_vector.h, > >>> line 389, compiled May 29 > >>> 2008 at 18:25:18 > >>> 11 [sig] ex6-opt 1088 > >>> d:\projects\vs\libmesh-0.6.2\examples\ex6\ex6-opt.exe: *** fatal error > - > >>> called with threadlist_ix -1 > >>> Hangup > >> > >> > >> Regards, > >> Matison Dmitry, > >> student, Department of Applied Mathematics, > >> Moscow Engineering Physics Institute (State University). > >> > ------------------------------------------------------------------------- > >> This SF.net email is sponsored by: Microsoft > >> Defy all challenges. Microsoft(R) Visual Studio 2008. > >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > >> _______________________________________________ > >> Libmesh-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/libmesh-users > >> > > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Libmesh-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/libmesh-users
