Date: Fri, 22 Feb 2002 19:27:22 +0000 From: T i m <[EMAIL PROTECTED]> Subject: Ok, which way round?
Hi Folks, I've got one of those little 2.5 to 3.5" adapters and there are no markings on it as to which end pin one is for either connector? I know which end is pin one on the 2.5" drives (the end near the master/slave jumper yes?) and I know how to spot Pin1 on a std 40W IDE cable (coloured stripe etc) but the converter has no clues whatsoever apart from a (the) missing pin on the std 40W IDE connector? (what number is the missing pin please?) So any clues please folks? All the best .. T i m ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
