Date: Sat, 5 Apr 2003 16:02:54 +1000 From: "Marcus" <[EMAIL PROTECTED]> Subject: Re: [LIB] libretto CT 50
OK Thanks Matts, I ll try ro replace RTC battery first. Regards, Marcus ----- Original Message ----- From: Matthew Hanson <[EMAIL PROTECTED]> To: Libretto <[EMAIL PROTECTED]> Sent: Saturday, April 05, 2003 2:59 PM Subject: Re: [LIB] libretto CT 50 > Date: Sat, 05 Apr 2003 04:54:04 +0000 > From: "Matthew Hanson" <[EMAIL PROTECTED]> > Subject: Re: [LIB] libretto CT 50 > > You should have no other problems getting your 50CT to run the 32MB RAM > upgrade and and a 6GB (I assume you ment GB not MB) hard drive. There have > been recent posts on the best way to set up a new Windows OS. > > The new CMOS battery should fix the date problem. Not having seen the ESC> > F1 > Windows problem before, I can only guess that the battery ought to fix > that problem too. > > Anyone have a URL to a copy of the 50CT manual PDF so Marcus can see what's > involved in replacing the RTC (CMOS) battery? > > Matt > > >From: "Marcus" <[EMAIL PROTECTED]> > > > >Thanks nail, if I expand my Lib CT 50 memory untill 32MB and harddisk to 6 > >MB is there any > >implications when running my Lib CT50. > >And thanks again for info www.micsol.com > >regards, > >Marcus > > > >----- Original Message ----- > >From: barnacle <[EMAIL PROTECTED]> > >To: Libretto <[EMAIL PROTECTED]> > >Sent: Saturday, April 05, 2003 6:47 AM > >Subject: Re: [LIB] libretto CT 50 > > > > > >Date: Fri, 4 Apr 2003 21:42:41 +0100 > >From: barnacle <[EMAIL PROTECTED]> > >Subject: Re: [LIB] libretto CT 50 > > > >On Thursday 03 Apr 2003 3:15 pm, you wrote: > > > Date: Fri, 11 Jul 2003 21:10:14 +1000 > > > From: "Marcus" <[EMAIL PROTECTED]> > > > Subject: libretto CT 50 > > > > > > Dear Librettos, > > > > > > I am a new member of this libretto mailing list, I just have libretto CT > >50 > > > from my brother and this libretto almost never used since 1997. The spec > > > are RAM 16kb, Hardisk 810 MB (now 350 MB free) windows 95. No disk > >drive, > > > no CD ROM, pentium I. > > > I want to use this libretto CT 50 just for email and presentation (by > >using > > > power point) I need your help for giving me advice to maximalize my > >Toshiba > > > libretto CT 50. How many size harddisk can I extend, and size to extend > > > the RAM, possible to use CD ROM? > > > >You can expand the RAM to 32M - expansion modules (8M or 16M) pop up on > >Ebay > >and here from time to time. This is the single biggest improvement you can > >make, speed-wise... > > > >Hard disks up to at least 20MB are possible - but there are bios > >implications > >which means you need to take care in formatting the disk. Lots of info in > >the > >archive. > > > >CD roms can be used - though none of them as far as I know (the original > >Tosh > >drive may be an exception) will allow you to boot from them. You can do > >little without either the pcmcia floppy drive or another machine into which > >you can insert a new hard disk, so you should probably look for a floppy > >drive. > > > > > > The second question is, when booting my libretto, I have to press F 1 > >and > > > then press Esc & yes before entering the Windows 95. (and battery > >calender > > > always 1990) . Do you have a suggestion for this ? > > > >You probably need a new bios battery. www.micsol.com or other places in the > >archives. It's possible that you can get the battery to charge if you leave > >the machine turned on while connected to the mains for a couple of days. > >(Note that the main battery doesn't charge when machine is turned on, but > >only when the machine is off - but the bios battery only charges when > >turned > >on!) > > > >If you come across e.g. a ct70 with a broken screen, you can transfer the > >guts > >into the 50 with the advantages of a faster processor and charging the > >battery while running. > > > >Enjoy the machine. > > > >Neil > > > _________________________________________________________________ > Add photos to your e-mail with MSN 8. Get 2 months FREE*. > http://join.msn.com/?page=features/featuredemail > > > > > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://www.silverace.com/libretto/ - Archives > > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** > > > ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
