Date: Wed, 10 Dec 2003 16:59:21 +0100 From: Mikkel Breiler <[EMAIL PROTECTED]> Subject: Re: [LIB] HELP!
On Tue, 9 Dec 2003 18:41:24 -0800, [EMAIL PROTECTED] wrote: >Date: Tue, 9 Dec 2003 21:33:15 EST >From: [EMAIL PROTECTED] >Subject: Re: [LIB] HELP! > >ThanksBreiler and Matt >Thanks for you mail! > >Well, I made a bootup disk by >cd windows\command >smartdrv.exe >bootdisk a: > >Its great but there are no drivers on the boot disk for a pcmcia CD drive! >Any idea how I get the bootup disk to see the drivers from my EXP PCMCIA >Portable CD-Rom drive? >Sorry I am a new at this. PCMCIA support in dos is extremely tricky as any installation of PCMCIA software usually goes for the harddrive, and many places must be edited for the software to load properly from floppy. But I have done this once. If only I could find that floppy I could give the files to you and let you interegrate the dos driver for the correct cd drive - they are all different, it is just the PCMCIA layer and MSCDEX that will be the same. >My Windows 98SE stalls right after the startup sound. >I have tried to restore the registry as well as build a 1rst time registry >and it still freezes after the starup sound. Have you tried Booting to safe mode, yank the audiodriver, reboot. ? It is the oldest trick in the book, but sometime the error is on to it ;( -breiler ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
