Date: Wed, 10 Dec 2003 17:03:22 +0100 From: Mikkel Breiler <[EMAIL PROTECTED]> Subject: Re: [LIB] HELP!
On Wed, 10 Dec 2003 05:55:24 -0800, "Matt Hanson" <[EMAIL PROTECTED]> wrote: >Date: Wed, 10 Dec 2003 13:47:32 +0000 >From: "Matt Hanson" <[EMAIL PROTECTED]> >Subject: Re: [LIB] HELP! > >>From: [EMAIL PROTECTED] >>Its great but there are no drivers on the boot disk for a pcmcia CD drive! >>Any idea how I get the bootup disk to see the drivers from my EXP PCMCIA >>Portable CD-Rom drive? > >David Chien is one of the resident experts on what I think is called Card >and Socket Services for DOS PCMCIA driver setups, but I don't know if he's >up on EXP drives. > >The most practical solution for setting up Windows on the Libby hard drives >is to get a cheap 3.5" to 2.5" IDE adapter. Pull the HDD out of the Libby, >and plug it in as the master drive in a desktop PC running windows. Here the disk should be filled with all needed drivers and W98 installation files, and showed back into the libby. I'm going to alter the advice a bit by insertion: >Boot from a Win98 boot FDD, select no >'CD-ROM support' with out >the Windows installation >CD in the drive, do not >CD\ to the CD-ROM drive, but to the installation dir you put on the harddrive >and run 'setup' from there. >I assume you tried running scandisk from the DOS prompt, right? And regscan, there is no reason to believe that an older copy of the registry is without fault just becuase a safe copy was made, it is only older due to a change. -breiler ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://www.silverace.com/libretto/ - Archives -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
