Date: Mon, 26 Jan 2004 22:38:50 -0500
From: "Gennadiy Tsygan" <[EMAIL PROTECTED]>
Subject: Re: [LIB] Networking problems

Matt, crossover cable is the fastest way to connect the PCs, and 4.7Mb/s may
be as good as it gets with old laptop. Switch actually may slow things down-
in theory, but not in your case. If the cable has at least 2 pairs of wire,
it should be capable of full duplex. Duplex mismatch because of a failed
autonegotiation is a common problem, so you may want to try to set both
cards to 100Mb Full duplex manually.
BTW, is your speed  4.7Mb/s or 4.7MB/s?

----- Original Message ----- 
From: "Matt Hanson" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Monday, January 26, 2004 3:31 AM
Subject: [LIB] Networking problems


> Date: Mon, 26 Jan 2004 08:28:45 +0000
> From: "Matt Hanson" <[EMAIL PROTECTED]>
> Subject: Networking problems
>
> I pisked up a cheap generic 10/100 LAN switch today hoping to increase the
> speed of tranfers from one Lib to the other while networked.  But I'm only
> getting the same rates as I was using just the crossover.
>
> I've got 3 straight through twisted pair CAT5 cables, the Linksys PCM100
> Etherfast PC card, my old Xicom combo modem/LAN card, and a generic
'Network
> Anywhere" card in the desktop.
>
> I tested the same transfer from L100 to L70 through the LAN switch with
> combinations of the 3 cables.  I tried the same transfer from the L100
with
> the Linksys card to the desktop with combinations of the cables
>
> All transfers actually turned out to be a tad slowed than using the
> crossover cable.  All rates averaged 4.7Mbits/sec.
>
> I've also been on live online support with Linksys, and can't determine if
> the middle LED for 10/100 on the PCM100 Etherfast NIC is supposed to
switch
> from yellow to green connected at 100Mbps.  All they can tell me is when
the
> light is 'on', it's connected at 100.  But it's been on, and yellow for
all
> my transfers using the crossover cable.  Anyone know if that 10/100 LED is
> supposed to change from yellow to green to indicate either a 10 or 100
> connection?
>
> Matt
>
> _________________________________________________________________
> There are now three new levels of MSN Hotmail Extra Storage!  Learn more.
> http://join.msn.com/?pgmarket=en-us&page=hotmail/es2&ST=1
>
>
>
>
>
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list
> http://www.silverace.com/libretto/ - Archives
>
>                  -------TO UNSUBSCRIBE-------
> Reply to any of the list messages. The reply mail should be
> addressed to: [EMAIL PROTECTED] - Then replace any text
> on the message's subject line: cmd:unsubscribe
>               --------TO UNSUBSCRIBE DIGEST------
> Do above but with this on subject line: cmd:unsubscribe digest
> **************************************************************
>
>




**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://www.silverace.com/libretto/ - Archives

                 -------TO UNSUBSCRIBE-------
Reply to any of the list messages. The reply mail should be
addressed to: [EMAIL PROTECTED] - Then replace any text
on the message's subject line: cmd:unsubscribe
              --------TO UNSUBSCRIBE DIGEST------
Do above but with this on subject line: cmd:unsubscribe digest
**************************************************************

Reply via email to