Hi, Thanks Siew for this steps, I try but error is same... Is libva need x-server ?
Best regards, Anteja On Wed, Oct 12, 2016 at 9:36 AM, Lim, Siew Hoon <siew.hoon....@intel.com> wrote: > Hi Anteja, > > > > The i965_drv_video.so may needs to be linked as emgd_drv_video.so by the > following step: > > Step 1: cd /usr/lib/dri > > Step 2: ln –sfv i965_drv_video.so emgd_drv_video.so > > > > You can give a try on the step above. > > > > Thank you. > > ….siewhoon > > > > *From:* Libva [mailto:libva-boun...@lists.freedesktop.org] *On Behalf Of > *Anteja > Vuk Macek > *Sent:* Wednesday, October 12, 2016 2:18 PM > *To:* Xiang, Haihao > *Cc:* libva@lists.freedesktop.org > *Subject:* Re: [Libva] va_getDriverName() returns -1 > > > > Hi, > > > > What I should I do to fix libva error ? > > > Best regards, > > Anteja Vuk - Macek > > Software Engineer > > > > Dolotron d.o.o. > > Ziskovec 141 > > HR-40000 Cakovec > > Croatia > > Tel: ++385 (40) 865 205 > > Fax: ++385 (40) 865 732 > > mailto: anteja...@dolotron.com > > _________________________________ > > > > On Wed, Oct 12, 2016 at 2:48 AM, Xiang, Haihao <haihao.xi...@intel.com> > wrote: > > > I don't think libva-intel-driver can work with emgd. You should install > emgd backend vaapi driver: > http://edc.intel.com/Software/Downloads/EMGD/ > > I never tried emgd before, I'm sorry that I cannot provide more help > to you on this. > > Thanks > Haihao > > > Hi, > > But I install emgd driver 39.00, but i have problem with loading this > > module, you can see photo https://my.syncplicity.com/share/skvhanon0s > > xj5f8/IMG_20161011_104347 ;. > > > > > Best regards, > > > > Anteja > > > > > > > > On Tue, Oct 11, 2016 at 11:00 AM, Anteja Vuk Macek <anteja.vm@dolot > <anteja.vm@dolot%0b>> > ron.com> wrote: > > > > Hi, > > > > I check if i915 is loaded, but i don't have similar message ... > > > > > > > > only that ... > > > > > > > > [ 3.529333] [drm] Initialized drm 1.1.0 20060810 > > > > > > > > Best regards, > > > > > > > > Anteja > > > > > > > > > > > > On Tue, Oct 11, 2016 at 10:53 AM, Xiang, Haihao <haihao.xiang@int > <haihao.xiang@int%0b>> > > el.com> wrote: > > > > > > > > > > Please check i915 is loaded or not. > > > > > > > > > > $> dmeg | grep i915 > > > > > > > > > > If i915 is loaded, you can see similar message below: > > > > > > > > > > [ 10.943138] [drm] Initialized i915 1.6.0 20160919 for > > > > > 0000:00:02.0 on minor 0 > > > > > > > > > > > > > > > Thanks > > > > > Haihao > > > > > > > > > > > > > > > > Hi > > > > > > >Could you post the output of 'lspci -nn'? I assumed you are > > > > > > using Intel Graphics. > > > > > > > > > > > > Yes I use intel graphic. In attachment is output.txt ... > > > > > > I don't have that /dev/dri/card0 ... > > > > > > > > > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > Anteja > > > > > > > > > > > > > > > > > > On Tue, Oct 11, 2016 at 8:17 AM, Xiang, Haihao <haihao.xiang@ > <haihao.xiang@%0b>> > > > > intel.com> wrote: > > > > > > > > > > > > > > Could you post the output of 'lspci -nn'? I assumed you are > > > > > > > using Intel Graphics. > > > > > > > > > > > > > > You can try to run vainfo without Xserver and Wayland. If > > > > > > > you still get error, you should > > > > > > > check the following first: > > > > > > > 1> is there /dev/dri/card0. If not, it means your GPU is > > > > > > > not supported by drm/i915. > > > > > > > 2> do you have permission to access /dev/dri/card0? Please > > > > > > > change the mode first if you haven't permission to access > > > > > > > /dev/dri/card0. > > > > > > > > > > > > > > Thanks > > > > > > > Haihao > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > I work with Fedora 18 ( KDE 32 bit ) ... I configure and > > > > > > > > install libva-1.5.0 on Fedora, use command vainfo and got > > > > > > > > error. > > > > > > > > > > > > > > > > [root@localhost intel-driver]# vainfo > > > > > > > > libva info: VA-API version 0.37.0 > > > > > > > > libva info: va_getDriverName() returns -1 > > > > > > > > libva error: va_getDriverName() failed with unknown libva > > > > > > > > error,driver_name=(null) > > > > > > > > vaInitialize failed with error code -1 (unknown libva > > > > > > > > error),exit > > > > > > > > > > > > > > > > I install before : > > > > > > > > inputproto-2.3.1 > > > > > > > > xorg-x11-drv-evdev-2.7.3-5 > > > > > > > > libdrm-2.4.52 > > > > > > > > mesa-10.2.1 > > > > > > > > glu-9.0.0 > > > > > > > > Also after installing libva I install intel-VA-driver- > > > > > > > > 1.5.0 ( git clone > > > > > > > > git://anongit.freedesktop.org/vaapi/intel-driver ) > > > > > > > > > > > > > > > > Configuration for libva and intel-VA-driver > > > > > > > > #./autogen.sh --prefix=/usr--enable -wayland > > > > > > > > > > > > > > > > Could somebody tell what I need to do for fix this error > > > > > > > > ? > > > > > > > > > > > > > > > > Best regards, > > > > > > > > > > > > > > > > TejaVM > > > > > > > > _______________________________________________ > > > > > > > > Libva mailing list > > > > > > > > Libva@lists.freedesktop.org > > > > > > > > https://lists.freedesktop.org/mailman/listinfo/libva > > > > > > > > > >
_______________________________________________ Libva mailing list Libva@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/libva
