Thanks, for some perfect replies. The quality should be good 'cause this is an
interactive radioplay (radio-active? ;-) ).
Another thing, I've noticed that if you have winamp in the background,
director/shockwave won't play the swa at least on a pc, I don't know about mac. Now I
have a soundtest in the beginning where I turn down the volume, play a 1.0 sec. sound
and check with soundBusy() to see when it finishes. If hasn't finish after 3.0 sec. I
tell the user that something is wrong.
The same goes with e.g Age of empires, theres no sound if winamp's playing. Does
anyone has other solutions for this situation?
Thanks again
John
>
>
> >I'd just like to point out that the source can be 8 bit. The
> sound is
> >converted to 16 bit before compression, so you may as well
> use 16 bit
> >sound, but you don't have to.
>
> Oh, good, something we can disagree on :-) This is gonna be
> good, because
> we both know audio (Colin's the acknowledged expert, but I'll
> match him
> blow-for-blow on audio ;-)
>
> My experience has shown far superior results with 16-bit
> source. The case
> in point: we took an 11/8/mono source, and it sounded
> terrible. We used
> Sound Forge to convert it to 11/16/mono, and it sounded
> great. I don't
> remember the bit rate we used--I believe it was 48 or 32.
> Bryan, are you
> out there?
>
> Maybe there were other factors. I wonder what other people's
> experience has
> been?
>
> Cordially,
> Kerry Thompson
> Learning Network
>
>
> [To remove yourself from this list, or to change to digest mode, go to
> http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
> email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
> Lingo-L is for learning and helping with programming Lingo. Thanks!]
>
>
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/LUJ/lingo-l.cgi To post messages to the list,
email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED])
Lingo-L is for learning and helping with programming Lingo. Thanks!]
