I have now tried this and I receive the following error:

chandev_setup unknown verb hsi0,0xbfe..... on line no 1 interpreted as
hsi0,0xbfe.....
Type man chandev for more info


Thanks!
Eric Sammons
(804)697-3925
FRIT - Unix Systems





"Kubannek, Harold" <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
12/24/2003 10:26 AM
Please respond to Linux on 390 Port

        To:     [EMAIL PROTECTED]
        cc:
        Subject:        Re: RedHat 7.2 install, issue #2

Eric,

if memory serves. At the network device prompt you specify : hsi
At the channel device layer prompt you pass : hsi0,0xbfe4,0xbfe5,0xbfe6

It's been a while but I think this worked for us. I think at the
additional parms for qdio devices we left it blank.

Hope this helps a little

Harold


-----Original Message-----
From: Eric Sammons [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 24, 2003 08:00
To: [EMAIL PROTECTED]
Subject: RedHat 7.2 install, issue #2


I have resolved my first issue through use of the provided REDHAT EXEC
file that I had overlooked originally.

I now have issue #2.  Under my SuSE guests I have a network card hsi0 with
the necessary network information.  Executing dmesg shows that my network
card is qeth 0xbfe4, 0xbfe5, 0xbfe6.  All of my guests are set up in this
manner.  My question is what parmeter line do I need to pass to RedHat to
have it know where and what my network device is.  I have tried the
following:

LCS=qeth0,0xbfe4,0xbfe5,0xbfe6

I have tried entering the information during the install process when
prompted.  I have also tried entering ctc0....

Any ideas?

Thanks!
Eric Sammons
(804)697-3925
FRIT - Unix Systems


This transmission may contain information that is privileged, confidential
and/or exempt from disclosure under applicable law. If you are not the
intended recipient, you are hereby notified that any disclosure, copying,
distribution, or use of the information contained herein (including any
reliance thereon) is STRICTLY PROHIBITED. If you received this
transmission in error, please immediately contact the sender and destroy
the material in its entirety, whether in electronic or hard copy format.
Thank you. A1.

Reply via email to