OK, they do a POR weekly, but I'll check that the cable wasn't pulled out and plugged in.
Thanks. On Wed, 2004-02-18 at 16:21, Alan Altmark wrote: > On Wednesday, 02/18/2004 at 05:07 EST, Aria Bamdad > <[EMAIL PROTECTED]> wrote: > > I have seen this message before also. In most cases, I had defined the > > addresses without the 0x prefix or somehow wrong. > > > > Another situation where I saw this message is on a mult port OSA card > where > > you had to specify the adapter number (not always 0). So, if your OSA > card > > has more than one adapter, you have to specify 1 or 2. > > Make that "0 or 1". There is no port 2. > > Such an error might also occur if the card has not been reset since the > cables were plugged in. OSA only detects cables at POR or chpid reset. > > Alan Altmark > Sr. Software Engineer > IBM z/VM Development -- Rich Smrcina Sr. Systems Engineer DSG eServer & Linux Solutions Milwaukee, WI rsmrcina at wi.rr.com rsmrcina at dsgroup.com Catch the WAVV! Stay for requirements and the free-for-all. Update your zSeries skills in 4 days for a very reasonable price. WAVV 2004 in Chattanooga, TN April 30-May 4, 2004 For details see http://www.wavv.org
