> Has anyone done a LPAR install on zSeries and then migrated to a zVM > infrastructure ?, any ideas on this ?.
Yes, we started this way. Migration was painless. > I would look at the LPAR install just so that we get a head start on the > project , the zVM is part of the IBM bundle that will come a little later > in the project. It's easy enough to do. We ended up installing VM in the same LPAR, which meant we had to shut down our linux image for awhile while the VM install/config was going on. Then in the system directory of VM we dedicated the LPAR resources the image used to the new guest, ipled the guest, and everything came up fine. Eventually we copied the data onto vm minidisks proper. We were using CTC to another LPAR at the time, which worked without any changes under VM. A week after getting the image up under VM, though, we moved to GuestLAN. HTH, ~ Daniel ----------------------------------------------------------------------- This message is the property of Time Inc. or its affiliates. It may be legally privileged and/or confidential and is intended only for the use of the addressee(s). No addressee should forward, print, copy, or otherwise reproduce this message in any manner that would allow it to be viewed by any individual not originally listed as a recipient. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized disclosure, dissemination, distribution, copying or the taking of any action in reliance on the information herein is strictly prohibited. If you have received this communication in error, please immediately notify the sender and delete this message. Thank you. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
