Tobias, Thanks for the report. I just wanted to caution you that if you ever have more than one OSA interface on your machine that you won't want to let things default. You should really specify which device numbers belong to which interface in /etc/chandev.conf.
When I get the zipl stuff modified in the initrd, I'll let you know, in case you want to test some more. Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Tobias D>rkes Sent: Friday, August 13, 2004 3:27 AM To: [EMAIL PROTECTED] Subject: Re: Next Slack/390 issue: network unreachable [Virus checked] Hi list, i did it. Slack/390 is up and running. Here the two problems i ran in: 1.) Disabled Wait after IPL 01: CP IPL 201 01: HCPGIR450W CP entered; disabled wait PSW 000A0000 0000000F Check that s390-tools are installed and zipl was performed before you re-IPL your linux. 2.) network unreachable INIT: Entering runlevel: 3 Going multiuser... �9;15|SIOCADDRT: Network is unreachable Starting sysklogd daemons: /usr/sbin/syslogd /usr/sbin/klogd -c 3 -x Starting OpenSSH SSH daemon: /usr/sbin/sshd Updating shared library links: /sbin/ldconfig An update to /etc/modules.conf corrects the error: echo "alias eth0 qeth" >> /etc/modules.conf Automatic detection of qeth works fine. Special thanks go to Mark. Regards, Tobias Doerkes ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
