I am having problems with hipersocket. I have hipersockets working fine on
2 native Linux LPARs however, this is my first attempt under z/VM.
linuxm01:/etc/sysconfig/network # ifconfig hsi0
hsi0: error fetching interface information: Device not found
linuxm01:/etc/sysconfig/network # ifconfig hsi0 up
hsi0: unknown interface: No such device
No matter what, I cannot seem to get this to work. I will mention that my
Linux guest are running 2.4.21-266 and on my native Linux LPARs I am
running 2.4.21-251. I remember reading something that 2.4.21-266 was not
working correctly but I thought it was just limited to virtual
hipersockets off a vlan. Is my problem mine or is it 2.4.21-266?
Some info follows:
In /etc/modules.conf
.
.
.
alias eth0 qeth
alias eth1 qeth
alias hsi0 qeth
In /etc/chandev/conf
.
.
.
noauto;qeth0,0x0600,0x0601,0x0602,0,0;add_parms,0x10,0x0600,0x0602,portname:OSD00
noauto;qeth1,0x0610,0x0611,0x0612,0,0;add_parms,0x10,0x0610,0x0612,portname:OSD03
noauto;qeth0,0x0620,0x0621,0x0622,0,0,0
In /etc/sysconfig/network/ifcfg-hsi0
BOOTPROTO='static'
STARTMODE='onboot'
IPADDR='161.186.86.150'
MTU='16384'
NETMASK='255.255.255.192'
NETWORK='161.186.86.128'
BROADCAST='161.186.86.191'
A z/VM query reveals:
OSA 0600 ON NIC 0600 UNIT 000 SUBCHANNEL = 0006
0600 QDIO-ELIGIBLE QIOASSIST NOT AVAILABLE
OSA 0601 ON NIC 0600 UNIT 001 SUBCHANNEL = 0007
0601 QDIO-ELIGIBLE QIOASSIST NOT AVAILABLE
OSA 0602 ON NIC 0600 UNIT 002 SUBCHANNEL = 0008
0602 QDIO ACTIVE QIOASSIST NOT AVAILABLE
0602 INP + 01 IOCNT = 00000192 ADP = 096 PROG = 000 UNAVAIL = 032
0602 BYTES = 000000000000640C
0602 OUT + 01 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0602 BYTES = 0000000000000000
0602 OUT + 02 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0602 BYTES = 0000000000000000
0602 OUT + 03 IOCNT = 00000260 ADP = 000 PROG = 128 UNAVAIL = 000
0602 BYTES = 00000000000071A6
0602 OUT + 04 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0602 BYTES = 0000000000000000
OSA 0610 ON NIC 0610 UNIT 000 SUBCHANNEL = 0009
0610 QDIO-ELIGIBLE QIOASSIST NOT AVAILABLE
OSA 0611 ON NIC 0610 UNIT 001 SUBCHANNEL = 000A
0611 QDIO-ELIGIBLE QIOASSIST NOT AVAILABLE
OSA 0612 ON NIC 0610 UNIT 002 SUBCHANNEL = 000B
0612 QDIO ACTIVE QIOASSIST NOT AVAILABLE
0612 INP + 01 IOCNT = 00000000 ADP = 096 PROG = 000 UNAVAIL = 032
0612 BYTES = 0000000000000000
0612 OUT + 01 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0612 BYTES = 0000000000000000
0612 OUT + 02 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0612 BYTES = 0000000000000000
0612 OUT + 03 IOCNT = 00000004 ADP = 000 PROG = 004 UNAVAIL = 124
0612 BYTES = 00000000000001A0
0612 OUT + 04 IOCNT = 00000000 ADP = 000 PROG = 000 UNAVAIL = 128
0612 BYTES = 0000000000000000
OSA 0620 ON OSA FE04 SUBCHANNEL = 0014
0620 QDIO-ELIGIBLE QIOASSIST NOT AVAILABLE
OSA 0621 ON OSA FE05 SUBCHANNEL = 0015
0621 QDIO-ELIGIBLE QIOASSIST NOT AVAILABLE
OSA 0622 ON OSA FE06 SUBCHANNEL = 0016
0622 QDIO-ELIGIBLE QIOASSIST NOT AVAILABLE
During bootup I see:
qeth: Trying to use card with devnos 0x620/0x621/0x622
qdio : response upon setting indicators is 0x3.
qeth: sense data available on read channel.
qeth: irb: 01 c2 40 17 01 23 6f 50 0e 00 10 10 00 80 00 00
qeth: irb: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 af fe 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: unit check/exception in read_handler (irq 0x14, devstat 0x0e,
schstat 0x00, rqparam 0x1005)
qdio : response upon setting indicators is 0x3.
qdio : response upon setting indicators is 0x3.
qeth: sense data available on read channel.
qeth: irb: 01 c2 40 17 01 23 6f 50 0e 00 10 10 00 80 00 00
qeth: irb: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 af fe 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: unit check/exception in read_handler (irq 0x14, devstat 0x0e,
schstat 0x00, rqparam 0x1005)
qdio : response upon setting indicators is 0x3.
qdio : response upon setting indicators is 0x3.
qeth: sense data available on read channel.
qeth: irb: 01 c2 40 17 01 23 6f 50 0e 00 10 10 00 80 00 00
qeth: irb: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 af fe 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: unit check/exception in read_handler (irq 0x14, devstat 0x0e,
schstat 0x00, rqparam 0x1005)
qdio : response upon setting indicators is 0x3.
qdio : response upon setting indicators is 0x3.
qeth: sense data available on read channel.
qeth: irb: 01 c2 40 17 01 23 6f 50 0e 00 10 10 00 80 00 00
qeth: irb: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 af fe 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: unit check/exception in read_handler (irq 0x14, devstat 0x0e,
schstat 0x00, rqparam 0x1005)
qdio : response upon setting indicators is 0x3.
qdio : response upon setting indicators is 0x3.
qeth: sense data available on read channel.
qeth: irb: 01 c2 40 17 01 23 6f 50 0e 00 10 10 00 80 00 00
qeth: irb: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 af fe 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: unit check/exception in read_handler (irq 0x14, devstat 0x0e,
schstat 0x00, rqparam 0x1005)
qdio : response upon setting indicators is 0x3.
qdio : response upon setting indicators is 0x3.
qeth: sense data available on read channel.
qeth: irb: 01 c2 40 17 01 23 6f 50 0e 00 10 10 00 80 00 00
qeth: irb: 01 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 af fe 00 00 00 00 00 00 00 00 00 00 00 00
qeth: sense data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
qeth: unit check/exception in read_handler (irq 0x14, devstat 0x0e,
schstat 0x00, rqparam 0x1005)
qdio : response upon setting indicators is 0x3.
qeth: recovery not successful on device 0x620/0x621/0x622; giving up.
qeth: There were problems in hard-setting up the card.
qeth: Trying to use card with devnos 0x610/0x611/0x612
qeth: Device 0x610/0x611/0x612 is a Guest LAN QDIO card (level: V511)
with link type Gigabit Eth (portname: OSD03)
qeth: Broadcast packets will not be echoed back on eth1.
qeth: Trying to use card with devnos 0x600/0x601/0x602
qeth: Device 0x600/0x601/0x602 is a Guest LAN QDIO card (level: V511)
with link type Gigabit Eth (portname: OSD00)
qeth: Broadcast packets will not be echoed back on eth0.
eth0: no IPv6 routers present
eth1: no IPv6 routers present
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
