Hey everyone...
I'm trying to connect to VSWITCH and can't seem to get it working. I have a
VSWITCH defined as type ethernet, LAN unaware. My virtual server NIC uses
vaddrs 3f04-3f06 and has been granted access to the VSWITCH. The VSWITCH looks
like;
q vswitch boswitch details
VSWITCH SYSTEM BOSWITCH Type: VSWITCH Connected: 1 Maxconn: INFINITE
PERSISTENT RESTRICTED ETHERNET Accounting: OFF
VLAN Unaware
State: Ready
QueueStorage: 8
Portname: PORT0 RDEV: 0E86 Controller: TCPIP VDEV: 0E86
VSWITCH Connection:
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 0 Discarded: 0 Errors: 0
RX Bytes: 0 TX Bytes: 0
Device: 0E88 Unit: 002 Role: DATA
Adapter Owner: LTROB NIC: 3F04 Name: UNASSIGNED
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 0 Discarded: 0 Errors: 0
RX Bytes: 0 TX Bytes: 0
Device: 3F06 Unit: 002 Role: DATA
After starting the virtual server I get "qeth-bus-ccw-0.0.3f04 no
interface found". When I look at /proc/qeth it shows the following;
devices CHPID interface cardtype port chksum
prio-q'ing rtr4 rtr6 fsz cnt
-------------------------- ----- ---------- -------------- ---- ------
---------- ---- ---- ----- -----
0.0.3f00/0.0.3f01/0.0.3f02 x09 hsi0 GuestLAN Hiper 0 sw
always_q_2 no no 16k 16
0.0.3f04/0.0.3f05/0.0.3f06 x0A GuestLAN QDIO 0 +++ LAN
OFFLINE +++
Devices 3f00-02 are successfully connecting to a guest LAN. I can use this
interface to ssh to the virtual server. I would like to define a second
network interface. I *think* I have my VSWITCH defined properly but it looks
like Linux sees these devices (3f04-06) as cardtype "Guest LAN". Could someone
using VSWITCH's please cat /proc/qeth and send me the output. I'm wondering if
the card type will be something like "VSwitch LAN".
Thanks,
Rob
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
