Rob,  eth0 is vSwitch & hsi0 hipersocket GLAN

[EMAIL PROTECTED] ~]$ ifconfig
eth0      Link encap:Ethernet  HWaddr 02:00:00:00:00:0C
         inet addr:nnn.n.nn.30  Bcast:nnn.n.nn.255  Mask:255.255.255.0
         inet6 addr: fe80::200:0:100:c/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1492  Metric:1
         RX packets:11589 errors:0 dropped:0 overruns:0 frame:0
         TX packets:11986 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:1792248 (1.7 MiB)  TX bytes:2240932 (2.1 MiB)

hsi0      Link encap:Ethernet  HWaddr 00:00:00:00:00:00
         inet addr:10.10.nn.30  Bcast:10.10.nn.127  Mask:255.255.255.128
         inet6 addr: fe80::ff:fe00:0/64 Scope:Link
         UP BROADCAST RUNNING NOARP MULTICAST  MTU:8192  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 b)  TX bytes:264 (264.0 b)

====================================================================================================

[EMAIL PROTECTED] ~]$ cat /proc/qeth
devices                    CHPID interface  cardtype       port chksum
prio-q'ing rtr4 rtr6 fsz   cnt
-------------------------- ----- ---------- -------------- ---- ------
---------- ---- ---- ----- -----
0.0.0500/0.0.0501/0.0.0502 x29   eth0       GuestLAN QDIO  0    sw
always_q_2 no   no   64k   16

0.0.0600/0.0.0601/0.0.0602 x2A   hsi0       GuestLAN Hiper 0    sw
always_q_2 no   no   16k   16

====================================================================================================

q vswitch SWTCHTTZ detail
VSWITCH SYSTEM SWTCHTTZ Type: VSWITCH Connected: 5    Maxconn: INFINITE
 PERSISTENT  RESTRICTED    NONROUTER                 Accounting: OFF
 VLAN Unaware
 State: Ready
 IPTimeout: 5         QueueStorage: 8
 Portname: OSDTTZ2    RDEV: 3140 Controller: VSWITCH1 VDEV:  3140
 Portname: OSDTTZ1    RDEV: 3170 Controller: VSWITCH2 VDEV:  3170 BACKUP
   VSWITCH Connection:
     RX Packets: 28316206   Discarded: 1936065    Errors: 0
     TX Packets: 23133704   Discarded: 0          Errors: 0
     RX Bytes: 1986154524           TX Bytes: 5025169565
     Device: 3142  Unit: 002   Role: DATA
Adapter Owner: LUITSRHN NIC: 0500  Name: UNASSIGNED
 RX Packets: 11645      Discarded: 0          Errors: 0
 TX Packets: 12040      Discarded: 0          Errors: 0
 RX Bytes: 1796048              TX Bytes: 1863418
 Device: 0502  Unit: 002   Role: DATA
 Options: Broadcast Multicast IPv6 IPv4 VLAN
   Unicast IP Addresses:
     nnn.n.nn.30          MAC: 02-00-00-00-00-0C
     FE80::200:0:100:C    MAC: 02-00-00-00-00-0C Local
   Multicast IP Addresses:
     224.0.0.1            MAC: 01-00-5E-00-00-01
     FF02::1              MAC: 33-33-00-00-00-01 Local
     FF02::1:FF00:C       MAC: 33-33-FF-00-00-0C Local

Rob Schwartz wrote:

Hey everyone...

I'm trying to connect to  VSWITCH and can't seem to get it working.   I have a 
VSWITCH defined as type ethernet, LAN unaware.   My virtual server NIC uses 
vaddrs 3f04-3f06 and has been granted access to the VSWITCH.  The VSWITCH looks 
like;

q vswitch boswitch details
VSWITCH SYSTEM BOSWITCH Type: VSWITCH Connected: 1    Maxconn: INFINITE
 PERSISTENT  RESTRICTED    ETHERNET                  Accounting: OFF
 VLAN Unaware
 State: Ready
 QueueStorage: 8
 Portname: PORT0      RDEV: 0E86 Controller: TCPIP    VDEV:  0E86
   VSWITCH Connection:
     RX Packets: 0          Discarded: 0          Errors: 0
     TX Packets: 0          Discarded: 0          Errors: 0
     RX Bytes: 0                    TX Bytes: 0
     Device: 0E88  Unit: 002   Role: DATA
   Adapter Owner: LTROB    NIC: 3F04  Name: UNASSIGNED
     RX Packets: 0          Discarded: 0          Errors: 0
     TX Packets: 0          Discarded: 0          Errors: 0
     RX Bytes: 0                    TX Bytes: 0
     Device: 3F06  Unit: 002   Role: DATA

After starting the virtual server I get "qeth-bus-ccw-0.0.3f04               no 
interface found".  When I look at /proc/qeth it shows the following;

devices                    CHPID interface  cardtype       port chksum 
prio-q'ing rtr4 rtr6 fsz   cnt
-------------------------- ----- ---------- -------------- ---- ------ 
---------- ---- ---- ----- -----
0.0.3f00/0.0.3f01/0.0.3f02 x09   hsi0       GuestLAN Hiper 0    sw     
always_q_2 no   no   16k   16
0.0.3f04/0.0.3f05/0.0.3f06 x0A              GuestLAN QDIO  0      +++ LAN 
OFFLINE +++

Devices 3f00-02 are successfully connecting to a guest LAN.  I can use this interface to ssh to the 
virtual server.  I would like to define a second network interface.  I *think* I have my VSWITCH 
defined properly but it looks like Linux sees these devices (3f04-06) as cardtype "Guest 
LAN".  Could someone using VSWITCH's please cat /proc/qeth and send me the output.  I'm 
wondering if the card type will be something like "VSwitch LAN".

Thanks,
Rob

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390



----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to