I have all the fixes applied from the Release Notes. That is why I went to
RSU 0601 on VM and TCPIP. The guest does show up on Q VSWITCH DET with the
correct ip address. The VSWCTL1 log shows the E005 (IP address already
registered) error. This looks like a SLES9 error, but SLES9 would continue
on.
I don't think IP is ever working on my SLES10 kernel. I cannot ping the ip
address, and the SLES10 guest just goes into the menus.
>>> Linuxrc v2.0.46 (Kernel 2.6.16.21-0.8-default) <<<
Main Menu
1) Settings
2) System Information
3) Kernel Modules (Hardware Drivers)
4) Start Installation or System
5) Verify Installation CD-ROM/DVD
6) Eject CD
7) Exit or Reboot
8) Power off
IBM has suggested that sometimes Linux does a SETIP twice against a NIC,
and this could be fixed by putting "arp=no" in the /etc/sysconfig/network/,
but I don't see how I can do that with the starter kernel.
Thanks,
Steph
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is a PRIVATE message. If you are not the intended recipient, please
delete without copying and kindly advise us by e-mail of the mistake in
delivery. NOTE: Regardless of content, this e-mail shall not operate to
bind CSC to any order or other contract unless pursuant to explicit written
agreement or government initiative expressly permitting the use of e-mail
for such purpose.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rob van der Heij
<[EMAIL PROTECTED]
m> To
Sent by: Linux on [email protected]
390 Port cc
<[EMAIL PROTECTED]
IST.EDU> Subject
Re: IP Address Already Registered -
SUSE SLES10
11/22/2006 04:13
PM
Please respond to
Linux on 390 Port
<[EMAIL PROTECTED]
IST.EDU>
On 11/22/06, Stephanie A Maginn <[EMAIL PROTECTED]> wrote:
> HCPIPN2833E Error 'E005'X adding IP address nn.nnn.nn.nnn for VSWITCH
> SYSTEM SWITCH01.
> HCPIPN2833E IP address is already registered.
I believe this is a bug in the VSWITCH and somewhere down the road it
got fixed. My recollection is that is still just worked fine...
Something with the extra ARP reply that got sent.
You should check with Q VSWITCH that the IP address got registered.
> After a pause, it says
> *** Could not find the SUSE Linux Enterprise Server 10 Installation
Source.
So I expect the two are not related, otherwise you would see that it
cannot find the server and the DNS. Most likely there is something
with the path that you specified (look at the FTP logging to match
your request with the actual location).
--
Rob van der Heij
Velocity Software, Inc
http://velocitysoftware.com/
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
