Looking at the previous Q NIC DET output, the problem could be that the portname of nic 700 shows UNASSIGNED, but it's connected to VSWITCHE who's portname is OSA3600. That would explain why nic 600 is working (VSWITCH1 portname really is UNASSIGNED, state is "Session Established") and 700 isn't (state is "CM_CONNECT").
-Brad On Thu, 2007-06-21 at 11:41 -0500, Bhemidhi, Ashwin wrote: > See below > > [EMAIL PROTECTED] 0.0.0700]# echo 1 > > /sys/bus/ccwgroup/drivers/qeth/0.0.0700/layer2 > bash: /sys/bus/ccwgroup/drivers/qeth/0.0.0700/layer2: No such file or > directory > > [EMAIL PROTECTED] 0.0.0700]# cd /sys/bus/ccwgroup/drivers/qeth/0.0.0700/ > [EMAIL PROTECTED] 0.0.0700]# touch layer2 > touch: cannot touch `layer2': Permission denied > > I also tried the following > > [EMAIL PROTECTED] 0.0.0700]# echo 1 > > /sys/bus/ccwgroup/drivers/qeth/0.0.0700/online > [EMAIL PROTECTED] 0.0.0700]# cat > /sys/bus/ccwgroup/drivers/qeth/0.0.0700/online > 0 > > I get a response 0 which according to the manual it says that the > interface is offline > > I have not tried the ifcfg-ethN option thinking that it will not work if > the device itself is not seen online. > > Thanks, > Ashwin > > > -----Original Message----- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of > Brad Hinson > Sent: Thursday, June 21, 2007 11:24 AM > To: [email protected] > Subject: Re: How to add Layer2 network device to linux guest machine > > Exactly what errors are you getting from Linux? Did you have any luck > echoing 1 to .../layer2 before echoing 1 to .../online and/or specifying > OPTIONS='layer2=1' in /etc/sysconfig/network-scripts/ifcfg-ethN? > > On Thu, 2007-06-21 at 10:25 -0500, Bhemidhi, Ashwin wrote: > > How do I need to define the NICDEF definition. I looked up the manual > > and there was not any ETHERNET option for "TYPE" on NICDEF statement. > I > > tried > > "NICDEF 0700 TYPE ETHERNET LAN SYSTEM VSWITCHE" and tried to save the > > profile and the VM complained about TYPE ETHERNET with the following > > > > > > DVHREQ2288I Your REPLACE request for LINDFLT at * has been accepted. > > DVHBXX6213E z/VM USER DIRECTORY CREATION PROGRAM - VERSION 5 RELEASE > > 1.0 > > DVHBXX6213E HCPDIR750I RESTRICTED PASSWORD FILE NOT FOUND > > DVHBXX6213E NICDEF 0700 TYPE ETHERNET LAN SYSTEM VSWITCHE > > DVHBXX6213E LIN00110 > > DVHBXX6213E HCPDIR751E INVALID OPERAND - ETHERNET FOLLOWING PROFILE > > DVHBXX6213E LINDFLT > > DVHBXX6213E HCPDIR1775E PROFILE DEFINITION LINDFLT IS INVALID AND > WILL > > DVHBXX6213E NOT BE PROCESSED FOR ANY USER DEFINITIONS THAT INCLUDE > IT. > > DVHBXX6213E EOJ DIRECTORY NOT UPDATED > > DVHREP3212E Unexpected RC= 2, from: EXEC DVHBBXXA P > > DVHREQ2289E Your REPLACE request for LINDFLT at * has failed; with RC > > DVHREQ2289E = 3212. > > > > Thanks, > > Ashwin > > > > -----Original Message----- > > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of > > Mark Post > > Sent: Wednesday, June 20, 2007 3:27 PM > > To: [email protected] > > Subject: Re: How to add Layer2 network device to linux guest machine > > > > >>> On Wed, Jun 20, 2007 at 3:24 PM, in message > > <[EMAIL PROTECTED]>, > "Bhemidhi, > > Ashwin" <[EMAIL PROTECTED]> wrote: > > > We defined NICDEF statements in the VM profile. Please see below > > > > > > VM guest profile contains the following: > > > -------------------------------------------------------------- > > > NICDEF 0600 TYPE QDIO LAN SYSTEM VSWITCH1 > > > NICDEF 0700 TYPE QDIO LAN SYSTEM VSWITCHE > > > > From an Alan Altmark posting on this list back in August 2006: > > 1. Don't forget to change the NICDEF / DEFINE NIC to have a TYPE > > ETHERNET > > also. > > > > > > Mark Post > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 > or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 > or visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
