I am still struck with the same problem. Does anyone know what this error message in /var/log/messages mean, it seems to have happened when I did "echo 0.0.0700,0.0.0701,0.0.0702 > /sys/bus/ccwgroup/drivers/qeth/group" but I am not sure if it correspondence to with the command.
Jun 27 11:55:46 svml09 kernel: qeth: received an IDX TERMINATE with cause code 0x4e Jun 27 11:55:46 svml09 kernel: qeth: Initialization in hardsetup failed! rc=-5 Thanks, Ashwin -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Sunday, June 24, 2007 11:03 AM To: [email protected] Subject: Re: How to add Layer2 network device to linux guest machine On Friday, 06/22/2007 at 01:41 AST, Neale Ferguson <[EMAIL PROTECTED]> wrote: > The DEFINE LAN command is the one with the TYPE ETHERNET operand. > > On Fri, 2007-06-22 at 11:36 -0600, Mark Post wrote: > > Looks like Alan may have been having a Chuckie moment. I don't see any > documentation that shows a TYPE ETHERNET option on NICDEF or DEFINE NIC either. Sorry. For Layer 2 OSA, make sure you use DEFINE NIC TYPE QDIO with DEFINE VSWITCH ETHERNET or DEFINE LAN TYPE ETHERNET. Alan Altmark z/VM Development IBM Endicott ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
