Hello,
We have been trying to configure Layer2 and Layer3 OSA on Linux on VM guest. To start with I defined 2 VSWITCH'es one for Layer2 and one for Layer3. Each switch has a unique OSA defined. I also defined a 2 NICDEF's which correspond to the VSWITCH'es. Layer3 is doing fine. We are unable to bring the Layer 2 interface up. I followed the instructions from the manual http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/as-IN/Installation_Guide/s2-s390info-qeth.html to add a qeth device. I am unable to bring the device online(returns 0) cat /sys/bus/ccwgroup/drivers/qeth/0.0.0700/online 0 I have copied the output of 1) Q NIC 2) Q LAN DETAILS 3) Q CPLEVEL 4) Q CMSLEVEL 5) VMINFO ON APAR: VM63538 6) UNAME -A Any help will be appreciated. Thanks, Santosh [EMAIL PROTECTED] ~ยจ# Q NIC Adapter 0600 Type: QDIO Name: foobar Devices: 3 Port 0 MAC: 02-00-00-00-00-05 VSWITCH: SYSTEM VSWITCH1 Adapter 0700 Type: QDIO Name: UNASSIGNED Devices: 3 Port 0 MAC: 02-00-00-00-00-06 VSWITCH: SYSTEM VSWITCHE q lan details VSWITCH SYSTEM VSWITCHE Type: VSWITCH Connected: 1 Maxconn: INFINITE PERSISTENT RESTRICTED ETHERNET Accounting: OFF VLAN Unaware State: Ready QueueStorage: 8 Portname: UNASSIGNED RDEV: 3604 Controller: VSWCTRL1 VDEV: 3604 Adapter Owner: SVML09 NIC: 0700 Name: UNASSIGNED VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 1 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware State: Ready IPTimeout: 5 QueueStorage: 8 Portname: UNASSIGNED RDEV: 3903 Controller: VSWCTRL1 VDEV: 3903 Adapter Owner: SVML09 NIC: 0600 Name: foobar RX Packets: 9559 Discarded: 1477 Errors: 0 TX Packets: 1464 Discarded: 0 Errors: 0 RX Bytes: 424154 TX Bytes: 233510 Device: 0602 Unit: 002 Role: DATA Options: Broadcast Multicast IPv6 IPv4 VLAN Unicast IP Addresses: 157.170.179.123 MAC: 02-00-00-00-00-05 FE80::200:0:300:5 MAC: 02-00-00-00-00-05 Local Multicast IP Addresses: 224.0.0.1 MAC: 01-00-5E-00-00-01 224.0.0.251 MAC: 01-00-5E-00-00-FB FF02::1 MAC: 33-33-00-00-00-01 Local FF02::FB MAC: 33-33-00-00-00-FB Local Ready; T=0.01/0.01 13:26:52 Ready; T=0.01/0.01 13:26:52 q cplevel z/VM Version 5 Release 1.0, service level 0601 (64-bit) Generated at 09/11/06 16:11:02 CDT IPL at 07/20/07 13:51:35 CDT Ready; T=0.01/0.01 13:28:05 q cmslevel CMS Level 21, Service Level 601 Ready; T=0.01/0.01 13:28:19 PPF fileid .....: ZVM PPF D Component name .: CP Setup ..: NO Product ID .....: 5VMCPR10 System .: VM ------------------------------------------------------------ PTF: UM31291 APAR: VM63538 ------------------------------ Receive status: RECEIVED.08/10/05.17:02:38.MAINT Apply status: APPLIED.02/20/05.22:08:09.MAINT uname -a Linux svml09 2.6.18-1.2747.el5 #1 SMP Thu Nov 9 18:57:27 EST 2006 s390x s390x s3 90x GNU/Linux ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
