Mark,
The manual did not have a redirect(">") symbol and also did not instruct
us to do "echo 1 > /sys/bus/ccwgroup/drivers/qeth/0.0.0700/layer2".
Once I did that we were able to bring up Layer2 NIC.
Thanks a lot for the help.
Santosh.
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Mark Post
Sent: Tuesday, July 24, 2007 2:55 PM
To: [email protected]
Subject: Re: Configuring Layer 2
>>> On Tue, Jul 24, 2007 at 2:06 PM, in message
<[EMAIL PROTECTED]>, "Kandi,
Santosh"
<[EMAIL PROTECTED]> wrote:
> Hello,
>
>
>
> We have been trying to configure Layer2 and Layer3 OSA on Linux on VM
guest.
>
-snip-
> Layer3 is doing fine. We are unable to bring the Layer 2 interface up.
I
> followed the instructions from the manual
>
>
http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/as-IN/Instal
lation_
> Guide/s2-s390info-qeth.html
>
> to add a qeth device. I am unable to bring the device online(returns
0)
>
> cat /sys/bus/ccwgroup/drivers/qeth/0.0.0700/online
> 0
And when you do
"echo 1 > /sys/bus/ccwgroup/drivers/qeth/0.0.0700/layer2"
and
"echo 1 > /sys/bus/ccwgroup/drivers/qeth/0.0.0700/online"
what happens?
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
