Yes...methinks that this started after a mkinitrd/zipl
Patrick Carroll | Enterprise Architect L.L.Bean, Inc.(r) | Double L St. | Freeport ME 04033 http://www.llbean.com | [EMAIL PROTECTED] | 207.552.2426 -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Peter 1 Oberparleiter Sent: Monday, November 26, 2007 10:13 AM To: [email protected] Subject: Re: Missing DIAG discipline; was RE: Linux on 390 Port <[email protected]> wrote on 26.11.2007 14:21:46: > Hi Peter, > Thanks for your email. > The lsmod was done immediately after reboot (i.e., I didn't manually > load it). > I did try to online the device but it's stubbornly still offline. > It seems that although the driver is in the initrd image, it isn't > being detected, or fails to load by the time it's required (the diag > module is in the initrd - I verified by decomposing the image). Has DIAG access to a DASD worked before on your system (i.e. not at reboot but by manual activation)? Regards, Peter -- Peter Oberparleiter Linux on System z Development IBM Deutschland Entwicklung GmbH ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
