I am attempting to add another dasd volume to my Slack 390 system. I have done the steps below. It worked fine, but when I IPL'd it could not mount the new volume/filesystem. How do I bring the volume online at ipl time?
1. Bring new volume online to linux. echo add device range=322e > /proc/dasd/devices 2. Figure out what device name was assigned to the volume. grep -i 322e /proc/dasd/devices 3. Format new DASD dasdfmt -b 4096 -p -f /dev/dasdb -l LNXD01 4. Create a partition on the new volume fdasd -a /dev/dasdb -l lnxd01 5. Put a file system on dasdb1 mke2fs -j -b 4096 /dev/dasdb1 6. Turn off forced fschks tune2fs -c0 -i0 /dev/dasdb1 7. Mount new file system mount /dev/dasdb1 /usr/dataVolume 8. Edit /etc/fstab so that file system will be mounted at IPL #vi /etc/fstab /dev/dasdb1 /usr/dataVolume ext3 defaults 0 0 Thanks for your help, Russ Jones ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
