Paul, >From a linux point of view, the only difference (SuSE 9 and 10 anyways) is having to set in /etc/sysconfig/hardware/hwcfg-qeth... QETH_LAYER2_SUPPORT=1.. Everthing else is the same.
>From the VM pov, the vswitch gets "ethernet". We're almost totally moved in order to LACP, and this really was all there was to it. (Those servers coming from Guest LAN, a little more than from L3 VSWITCH though, but not much). Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Ayer, Paul W Sent: Friday, November 28, 2008 5:33 AM To: [email protected] Subject: [LINUX-390] Layer 2 Good morning all, Does anyone have a link to some good doc on setting up layer 2 interfaces on zlinux? Some pointers would be great. Thanks, Paul ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
