Adam, I don't think it is the mac address since I see:
qeth: MAC address 02:ad:c3:10:10:95 successfully registered on device eth0 On the console. I have to assume that I am getting to the VSWITCH and that nothing is blocking me from doing so. George Shedlock Jr AEGON Information Technology AEGON USA 502-560-3541 -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Adam Thornton Sent: Tuesday, November 25, 2008 10:09 AM To: [email protected] Subject: Re: SLES 10 SP 2 - Starter Vswitch On Nov 25, 2008, at 7:52 AM, Shedlock, George wrote: > Gentle Listers, > > I have the SLES 10 SP2 starter system build and am attempting to > create my first guest from the starter system. I start the install > process, console log follows: > [...snip...] > Any suggestions? How very strange. I'm going to guess that the answer is in the MAC address specification. You gave it 101095. Is it perhaps expecting colons between the bytes? Does it want you to specify all six bytes, even though the first three are defined by CP? I don't remember, and I don't have a Layer 2 guest LAN/VSWITCH handy to test on right now. Does anyone remember off-hand? Adam ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
