Gentle Listers, I have the SLES 10 SP2 starter system build and am attempting to create my first guest from the starter system. I start the install process, console log follows:
Activating manual setup program. >>> Linuxrc v2.0.79 (Kernel 2.6.16.60-0.21-default) <<< Main Menu 1) Settings 2) System Information 3) Kernel Modules (Hardware Drivers) 4) Start Installation or System 5) Verify Installation CD-ROM/DVD 6) Eject CD 7) Exit or Reboot 8) Power off > 4 Start Installation or System 1) Start Installation or Update 2) Boot Installed System 3) Start Rescue System > 1 Choose the source medium. 1) CD-ROM 2) Network 3) Hard Disk > 2 Choose the network protocol. 1) FTP 2) HTTP 3) NFS 4) SMB / CIFS (Windows Share) 5) TFTP > 1 Please select the type of your network device. 1) OSA-2 or OSA Express 2) Hipersockets -------------------- 3) Channel To Channel (CTC) 4) ESCON 5) Inter-User Communication Vehicle (IUCV) > 1 Please choose the CCW bus interface. 1) QDIO 2) LCS > 1 Please choose the physical medium. 1) Ethernet 2) Token Ring > 1 qdio: loading QDIO base support version 2 qeth: loading qeth S/390 OSA-Express driver 0.0.0340 1731/01 0.0.0341 1731/01 0.0.0342 1731/01 Device address for read channel> 0.0.0340 Device address for write channel> 0.0.0341 Device address for data channel> 0.0.0342 Portname to use> Enable OSI Layer 2 support? 1) Yes 2) No > 1 MAC address> 101095 qeth: Device 0.0.0340/0.0.0341/0.0.0342 is a Guest LAN QDIO card (level: V532) with link type GuestLAN QDIO (portname: ) qeth: MAC address 02:ad:c3:10:10:95 successfully registered on device eth0 So far so good. Then I get prompted with: Please select the type of your network device. 1) OSA-2 or OSA Express 2) Hipersockets -------------------- 3) Channel To Channel (CTC) 4) ESCON 5) Inter-User Communication Vehicle (IUCV) > Any suggestions? George Shedlock Jr AEGON Information Technology AEGON USA 502-560-3541 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
