Do you actually have a Layer 2 VSwitch defined? If not, then answer 2 to the
last question.
Shedlock, George wrote:
Gentle Listers,
I have the SLES 10 SP2 starter system build and am attempting to create my
first guest from the starter system. I start the install process, console log
follows:
Activating manual setup program.
Linuxrc v2.0.79 (Kernel 2.6.16.60-0.21-default) <<<
Main Menu
1) Settings
2) System Information
3) Kernel Modules (Hardware Drivers)
4) Start Installation or System
5) Verify Installation CD-ROM/DVD
6) Eject CD
7) Exit or Reboot
8) Power off
4
Start Installation or System
1) Start Installation or Update
2) Boot Installed System
3) Start Rescue System
1
Choose the source medium.
1) CD-ROM
2) Network
3) Hard Disk
2
Choose the network protocol.
1) FTP
2) HTTP
3) NFS
4) SMB / CIFS (Windows Share)
5) TFTP
1
Please select the type of your network device.
1) OSA-2 or OSA Express
2) Hipersockets
--------------------
3) Channel To Channel (CTC)
4) ESCON
5) Inter-User Communication Vehicle (IUCV)
1
Please choose the CCW bus interface.
1) QDIO
2) LCS
1
Please choose the physical medium.
1) Ethernet
2) Token Ring
1
qdio: loading QDIO base support version 2
qeth: loading qeth S/390 OSA-Express driver
0.0.0340 1731/01
0.0.0341 1731/01
0.0.0342 1731/01
Device address for read channel>
0.0.0340
Device address for write channel>
0.0.0341
Device address for data channel>
0.0.0342
Portname to use>
Enable OSI Layer 2 support?
1) Yes
2) No
1
MAC address>
101095
qeth: Device 0.0.0340/0.0.0341/0.0.0342 is a Guest LAN QDIO card (level: V532)
with link type GuestLAN QDIO (portname: )
qeth: MAC address 02:ad:c3:10:10:95 successfully registered on device eth0
So far so good. Then I get prompted with:
Please select the type of your network device.
1) OSA-2 or OSA Express
2) Hipersockets
--------------------
3) Channel To Channel (CTC)
4) ESCON
5) Inter-User Communication Vehicle (IUCV)
Any suggestions?
George Shedlock Jr
AEGON Information Technology
AEGON USA
502-560-3541
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service: 360-715-2467
http://www.linkedin.com/in/richsmrcina
Catch the WAVV! http://www.wavv.org
WAVV 2009 - Orlando, FL - May 15-19, 2009
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
