Just tried that as well. Didn't work. Any time I enter in anything other than 0 or 1 I get:
Please choose: Error: undefined configuration On Tue, Apr 7, 2009 at 9:27 AM, Mike Friesenegger <mfrieseneg...@novell.com>wrote: > I just tried #cp vi vmsg 1 1 on my sles10 sp2 and it worked. > > Mike > > >>> On 4/7/2009 at 07:55 AM, in message > <2d2d8f600904070655v45af818fxb640e19bae891...@mail.gmail.com>, Saul > Thersites > <fromandrom...@gmail.com> wrote: > > I just tried to enter single user mode and I can not get pas the boot > menu > > options. There are two options 1. ipl and 2. Failsafe. I have tried two > > methods to get to single user mode. > > > > First, I tried #cp vi vmsg 0 1 (even though this is for zVM) > > Second, I tried to use s instead of 1 or 2. No luck. > > Third, I tried to use zipl. No luck. > > > > Can someone please tell me how I get into single user mode? > > > > On Tue, Mar 31, 2009 at 9:13 PM, Saulo Silva > > <sauloaugustosi...@gmail.com>wrote: > > > >> Hi , > >> > >> Do you have console access to your linux box ? > >> If you have look at the /sys/class/net to discover if you have a the > >> device > >> properly configured at your system . You could also look at the > >> /sys/bus/ccwgroup/drivers/qeth to see if your channel addres was > identified > >> by linux . > >> If a ls at /*sys*/bus/*ccw*/devices/ you could determine the address > that > >> you can configure at your linux box . > >> > >> I my opinion that is the start to know if your devices is OK to use . > >> > >> Best Regards, > >> > >> Saulo Augusto Silva > >> > >> 2009/3/30 Saul Thersites <fromandrom...@gmail.com> > >> > >> > I have SLES 10 service pack 2 > >> > I just did a POR and the system does not boot up with a command > prompt. > >> > > >> > qeth-bus-ccw-0.0.0900 no interface found > >> > > >> > 1A failed setting up service network > >> > > >> > ifup: No configuration found for sit0 <-- it just sits at this > line > >> > > >> > any ideas? > >> > > >> > ---------------------------------------------------------------------- > >> > For LINUX-390 subscribe / signoff / archive access instructions, > >> > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or > >> > visit > >> > http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> > > >> > >> ---------------------------------------------------------------------- > >> For LINUX-390 subscribe / signoff / archive access instructions, > >> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or > >> visit > >> http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
