This is running native. No z/VM and my boot screen does not have Note: VM users please use '#cp vi vmsg <number> <kernel-parameters>'
On Tue, Apr 7, 2009 at 9:50 AM, Mike Friesenegger <mfrieseneg...@novell.com>wrote: > I see the following message when I IPL my SLES10SP2: > > ipl 150 > 00: zIPL v1.6.3 interactive boot menu > 00: > 00: 0. default (ipl) > 00: > 00: 1. ipl > 00: 2. Failsafe > 00: > 00: Note: VM users please use '#cp vi vmsg <number> <kernel-parameters>' > 00: > 00: Please choose (default will boot in 10 seconds): > > I have been typing "#cp vi vmsg 1 1" but I also tried "#cp vi vmsg 0 1" > just now. Here is what I get: > > System Boot Control: The system has been set up > System Boot Control: Running /etc/init.d/boot.local > �1A..done INIT: Entering runlevel: 1 > Boot logging started on /dev/ttyS0(/dev/console) at Tue Apr 7 08:45:50 > 2009 > Master Resource Control: previous runlevel: N, switching to runlevel: 1 > INIT: Going single user > INIT: Sending processes the TERM signal > Give root password for login: > > I am not sure why you would be seeing something different. z/VM version? > > Mike > > >>> On 4/7/2009 at 08:35 AM, in message > <2d2d8f600904070735n52c1ffe7q1b82c984befba...@mail.gmail.com>, Saul > Thersites > <fromandrom...@gmail.com> wrote: > > Just tried that as well. Didn't work. > > Any time I enter in anything other than 0 or 1 I get: > > > > Please choose: > > Error: undefined configuration > > > > > > On Tue, Apr 7, 2009 at 9:27 AM, Mike Friesenegger > > <mfrieseneg...@novell.com>wrote: > > > >> I just tried #cp vi vmsg 1 1 on my sles10 sp2 and it worked. > >> > >> Mike > >> > >> >>> On 4/7/2009 at 07:55 AM, in message > >> <2d2d8f600904070655v45af818fxb640e19bae891...@mail.gmail.com>, Saul > >> Thersites > >> <fromandrom...@gmail.com> wrote: > >> > I just tried to enter single user mode and I can not get pas the boot > >> menu > >> > options. There are two options 1. ipl and 2. Failsafe. I have tried > two > >> > methods to get to single user mode. > >> > > >> > First, I tried #cp vi vmsg 0 1 (even though this is for zVM) > >> > Second, I tried to use s instead of 1 or 2. No luck. > >> > Third, I tried to use zipl. No luck. > >> > > >> > Can someone please tell me how I get into single user mode? > >> > > >> > On Tue, Mar 31, 2009 at 9:13 PM, Saulo Silva > >> > <sauloaugustosi...@gmail.com>wrote: > >> > > >> >> Hi , > >> >> > >> >> Do you have console access to your linux box ? > >> >> If you have look at the /sys/class/net to discover if you have a the > >> >> device > >> >> properly configured at your system . You could also look at the > >> >> /sys/bus/ccwgroup/drivers/qeth to see if your channel addres was > >> identified > >> >> by linux . > >> >> If a ls at /*sys*/bus/*ccw*/devices/ you could determine the address > >> that > >> >> you can configure at your linux box . > >> >> > >> >> I my opinion that is the start to know if your devices is OK to use . > >> >> > >> >> Best Regards, > >> >> > >> >> Saulo Augusto Silva > >> >> > >> >> 2009/3/30 Saul Thersites <fromandrom...@gmail.com> > >> >> > >> >> > I have SLES 10 service pack 2 > >> >> > I just did a POR and the system does not boot up with a command > >> prompt. > >> >> > > >> >> > qeth-bus-ccw-0.0.0900 no interface found > >> >> > > >> >> > 1A failed setting up service network > >> >> > > >> >> > ifup: No configuration found for sit0 <-- it just sits at this > >> line > >> >> > > >> >> > any ideas? > >> >> > > >> >> > > ---------------------------------------------------------------------- > >> >> > For LINUX-390 subscribe / signoff / archive access instructions, > >> >> > send email to lists...@vm.marist.edu with the message: INFO > LINUX-390 > >> or > >> >> > visit > >> >> > http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> >> > > >> >> > >> >> > ---------------------------------------------------------------------- > >> >> For LINUX-390 subscribe / signoff / archive access instructions, > >> >> send email to lists...@vm.marist.edu with the message: INFO > LINUX-390 > >> or > >> >> visit > >> >> http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> >> > >> > > >> > ---------------------------------------------------------------------- > >> > For LINUX-390 subscribe / signoff / archive access instructions, > >> > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or > >> > visit > >> > http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> > >> ---------------------------------------------------------------------- > >> For LINUX-390 subscribe / signoff / archive access instructions, > >> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or > >> visit > >> http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
