Thanks Steffen, I'm now in single user mode. I need to change:
qeth-bus-ccw-0.0.0900 no interface found What specifically do I need to change here? All that has been done is a CSS move from 1 to 2. How can I "can activate the interface manually"? On Tue, Apr 7, 2009 at 11:16 AM, Steffen Maier <ma...@linux.vnet.ibm.com>wrote: > I'm not sure which variations of zipl menu parameters you tried and I > haven't confirmed my suggestion, but did you use one of the following?: > > 0 s > > or > > 1 s > > I.e. appending Linux kernel parameters to the zipl menu item number on > the hardware messages console. > > You may find more details in the Device Drivers Book in the Appendix > "Booting Linux", Section "Booting Linux in LPAR mode", Subsection > "Booting from DASD, tape, or SCSI" on pages 432-436. > > http://www.ibm.com/developerworks/linux/linux390/october2005_documentation.html > > http://download.boulder.ibm.com/ibmdl/pub/software/dw/linux390/docu/l26cdd04.pdf > > On 04/07/2009 05:14 PM, Saul Thersites wrote: > > This is running native. No z/VM and my boot screen does not have > > > > Note: VM users please use '#cp vi vmsg <number> <kernel-parameters>' > > > >>>>> On 4/7/2009 at 08:35 AM, in message > >> <2d2d8f600904070735n52c1ffe7q1b82c984befba...@mail.gmail.com>, Saul > >> Thersites > >> <fromandrom...@gmail.com> wrote: > >>> Just tried that as well. Didn't work. > >>> Any time I enter in anything other than 0 or 1 I get: > >>> > >>> Please choose: > >>> Error: undefined configuration > > >>>>>>> On 4/7/2009 at 07:55 AM, in message > >>>> <2d2d8f600904070655v45af818fxb640e19bae891...@mail.gmail.com>, Saul > >>>> Thersites > >>>> <fromandrom...@gmail.com> wrote: > >>>>> I just tried to enter single user mode and I can not get pas the boot > >>>> menu > >>>>> options. There are two options 1. ipl and 2. Failsafe. I have tried > >> two > >>>>> methods to get to single user mode. > >>>>> > >>>>> First, I tried #cp vi vmsg 0 1 (even though this is for zVM) > >>>>> Second, I tried to use s instead of 1 or 2. No luck. > >>>>> Third, I tried to use zipl. No luck. > >>>>> > >>>>> Can someone please tell me how I get into single user mode? > > >>>>>> 2009/3/30 Saul Thersites <fromandrom...@gmail.com> > >>>>>> > >>>>>>> I have SLES 10 service pack 2 > >>>>>>> I just did a POR and the system does not boot up with a command > >>>> prompt. > >>>>>>> qeth-bus-ccw-0.0.0900 no interface found > >>>>>>> > >>>>>>> 1A failed setting up service network > >>>>>>> > >>>>>>> ifup: No configuration found for sit0 <-- it just sits at this > >>>> line > >>>>>>> any ideas? > > Steffen > > Linux on System z Development > > IBM Deutschland Research & Development GmbH > Vorsitzender des Aufsichtsrats: Martin Jetter > Geschäftsführung: Erich Baier > Sitz der Gesellschaft: Böblingen > Registergericht: Amtsgericht Stuttgart, HRB 243294 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
