Did you GRANT the Linux to the vswitch ? Cordialement / Vriendelijke Groeten / Best Regards / Med Vänliga Hälsningar Tore Agblad
Volvo Information Technology Infrastructure Mainframe Design & Development SE-405 08, Gothenburg Sweden E-mail: [email protected] http://www.volvo.com/volvoit/global/en-gb/ ________________________________________ From: Linux on 390 Port [[email protected]] On Behalf Of van Sleeuwen, Berry [[email protected]] Sent: Wednesday, June 17, 2009 13:24 To: [email protected] Subject: How to activate 2nd nic Hello listers, I'm trying to get the second nic working in an SLES10 guest. In one guest I succeeded but I don't know why. I had been tinkering in several places including with yast. But once it worked I still didn't figure out what the trick was. The guest has two nic's defined in VM, both qdio, connected to a vswitch. nlzlx213:/ # vmcp q v nic Adapter 0F00.P00 Type: QDIO Name: devclaw Devices: 3 MAC: 02-00-00-00-00-11 VSWITCH: SYSTEM OSNLINUX Adapter 0F10.P00 Type: QDIO Name: devclaw Devices: 3 MAC: 02-00-00-00-00-12 VSWITCH: SYSTEM TSM1 The ifconfig shows eth0, eth1 and lo. But the nlzlx214, the second machine, (almost) identical to the nlzlx213 only shows eth0 and lo. Activating eth1 shows: nlzlx214:~ # ifup eth1 Interface eth1 is not available rcnetwork restart only restarts eth0. I also tried to activate with yast, the eth0 (device f00) show as just f00. The devices that should be used for eth1, f10-f12, are listed seperatly. After creating the configuration files in /etc/sysconfig/network, just like in the nlzlx213 machine, I do see the config on device f10, but f11 and f12 show not configured. Somewhere along the route I have missed a step. I expected to create the configuration in /etc/sysconfig/network would be enough but apparently I need to do something more. So the question, how to activate and configure the second nic? I do prefer to do this without yast, not only because I don't succeed with yast as well, but also to see what has to be done here. Met vriendelijke groet/With kind regards, Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven ( +31 (0)6 22564276 Atos Origin <http://www.atosorigin.com/> MO OC Mainframe Services ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
