Hi Berry, That should work. If not, something is hung up due to the previous attempts. As the nic is not online anyway I would simply detach and newly define it. If this does not work we need to look at software levels there were problems with udev in SLES10SP0 and SLES10SP1 that are fixed in SP2.
Best regards, Pieter Harder [email protected] tel +31-73-6837133 / +31-6-47272537 -----Oorspronkelijk bericht----- Van: Linux on 390 Port [mailto:[email protected]] Namens van Sleeuwen, Berry Verzonden: woensdag 17 juni 2009 14:19 Aan: [email protected] Onderwerp: Re: How to activate 2nd nic Hi Peter, I don't like a reboot when it also can be done dynamically. But even so, on that other machine I did perform a reboot with no luck either. As for chccwdev: nlzlx214:~ # chccwdev -e 0f10 Setting device 0.0.0f10 online Failed And the same for f11 and f12. Regards, Berry. -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Harder, Pieter Sent: woensdag 17 juni 2009 14:04 To: [email protected] Subject: Re: How to activate 2nd nic Hi Berry, After providing the hardware definition you need to either reboot or set the device online for udev to do it's magic. Something like chccdev -e 0.0.ccuu... Best regards, Pieter Harder [email protected] tel +31-73-6837133 / +31-6-47272537 -----Oorspronkelijk bericht----- Van: Linux on 390 Port [mailto:[email protected]] Namens van Sleeuwen, Berry Verzonden: woensdag 17 juni 2009 13:38 Aan: [email protected] Onderwerp: Re: How to activate 2nd nic Hi Pieter, In this case *) no. But now I have. Ifup still doesn't see the eth1 so I guess there is more to it? *) yeterday I did this on another machine and there I did create the file in sysconfig/hardware. But then also no luck. Untill all of a sudden after some more tinkering suddenly the eth1 was activated. Regards, Berry. -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Harder, Pieter Sent: woensdag 17 juni 2009 13:29 To: [email protected] Subject: Re: How to activate 2nd nic Hi Berry, You did provide /etc/sysconfig/hardware for the second nic? If not the /etc/sysconfig/network doesn't kick in as the hardware is not picked up. Best regards, Pieter Harder [email protected] tel +31-73-6837133 / +31-6-47272537 -----Oorspronkelijk bericht----- Van: Linux on 390 Port [mailto:[email protected]] Namens van Sleeuwen, Berry Verzonden: woensdag 17 juni 2009 13:24 Aan: [email protected] Onderwerp: How to activate 2nd nic Hello listers, I'm trying to get the second nic working in an SLES10 guest. In one guest I succeeded but I don't know why. I had been tinkering in several places including with yast. But once it worked I still didn't figure out what the trick was. The guest has two nic's defined in VM, both qdio, connected to a vswitch. nlzlx213:/ # vmcp q v nic Adapter 0F00.P00 Type: QDIO Name: devclaw Devices: 3 MAC: 02-00-00-00-00-11 VSWITCH: SYSTEM OSNLINUX Adapter 0F10.P00 Type: QDIO Name: devclaw Devices: 3 MAC: 02-00-00-00-00-12 VSWITCH: SYSTEM TSM1 The ifconfig shows eth0, eth1 and lo. But the nlzlx214, the second machine, (almost) identical to the nlzlx213 only shows eth0 and lo. Activating eth1 shows: nlzlx214:~ # ifup eth1 Interface eth1 is not available rcnetwork restart only restarts eth0. I also tried to activate with yast, the eth0 (device f00) show as just f00. The devices that should be used for eth1, f10-f12, are listed seperatly. After creating the configuration files in /etc/sysconfig/network, just like in the nlzlx213 machine, I do see the config on device f10, but f11 and f12 show not configured. Somewhere along the route I have missed a step. I expected to create the configuration in /etc/sysconfig/network would be enough but apparently I need to do something more. So the question, how to activate and configure the second nic? I do prefer to do this without yast, not only because I don't succeed with yast as well, but also to see what has to be done here. Met vriendelijke groet/With kind regards, Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven ( +31 (0)6 22564276 Atos Origin <http://www.atosorigin.com/> MO OC Mainframe Services ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 Brabant Water N.V. Postbus 1068 5200 BC 's-Hertogenbosch http://www.brabantwater.nl Handelsregister: 16005077 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
