I think it is not a layer2/3 issue. When that is wrong the nic will get an error on activation, but the devices will come online. This sounds more like some hangup in udev for the basic device.
Best regards, Pieter Harder [email protected] tel +31-73-6837133 / +31-6-47272537 -----Oorspronkelijk bericht----- Van: Linux on 390 Port [mailto:[email protected]] Namens Rob van der Heij Verzonden: woensdag 17 juni 2009 14:26 Aan: [email protected] Onderwerp: Re: How to activate 2nd nic 2009/6/17 van Sleeuwen, Berry <[email protected]>: > As for chccwdev: > nlzlx214:~ # chccwdev -e 0f10 > Setting device 0.0.0f10 online > Failed > The /var/log/messages probably gives you more information on why it fails. Maybe you have layer2 and layer3 mixed up? Rob ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 Brabant Water N.V. Postbus 1068 5200 BC 's-Hertogenbosch http://www.brabantwater.nl Handelsregister: 16005077 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
