Dear all,
In this matter I reinstalled now a SLES 10 as Installation server and there is NO problem in handling the LV. Because of this I conclude: This is a problem in SUSE11 and not in z/VM or with the hardware. I checked with a vanilla SLES 11 GA installation and this issue is also happening with the GA version. I have registered a Service Request at Novell (10513340661) but I was told that there will be probably no official Level 3 support since I have not the right level of service subscription. Maybe somebody from Novell could help me in this matter because I think this is an essential problem of SLES11 and other implementations could easily face the same problem. By the way: I have another issue with SLES 11 too: It is not possible to specify a DASD as read only in the parameter line of zipl.config since the script 02-start.sh complains about the brackets in the statement (e.g. DASD=100-103(ro), 200-20F). Also this is something I will not receive L3 support on. I wonder what kind of support I would get. Florian On Wed, Jul 29, 2009 at 10:00 PM, Florian Bilek <[email protected]>wrote: > Jay, > > I have seen it also on 231. Which is the second DASD in the group. Tomorrow > I will install a GA version of SLES 11 without any fixes and check if the > same behavior will happen. Then I will check it under SLES 10 to see if it > is really a hardware issue. > > Florian > > > > On Wed, Jul 29, 2009 at 7:12 PM, Robert J Brenneman <[email protected]>wrote: > >> Do you only ever get the messages from device 230 or can they come >> from anyone in the volume group? >> >> This sounds like something to discuss with the DASD vendor. >> >> -- >> Jay Brenneman >> >> ---------------------------------------------------------------------- >> For LINUX-390 subscribe / signoff / archive access instructions, >> send email to [email protected] with the message: INFO LINUX-390 or >> visit >> http://www.marist.edu/htbin/wlvindex?LINUX-390 >> > > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
