It seams that from outside this server the two nicdef 700 and 710 have the same MAC address However from inside when issuing IFCONFIG to display, the MACs are different and not any of these MAC addresses seen from inside the server is even near the MAC address as seen from outside.
Hmmm......... Cordialement / Vriendelijke Groeten / Best Regards / Med Vänliga Hälsningar Tore Agblad Volvo Information Technology Infrastructure Mainframe Design & Development SE-405 08, Gothenburg Sweden E-mail: [email protected] http://www.volvo.com/volvoit/global/en-gb/ ________________________________________ From: Linux on 390 Port [[email protected]] On Behalf Of Mark Post [[email protected]] Sent: Friday, July 09, 2010 07:44 To: [email protected] Subject: Re: Strange problems adding network adapter no 2 (eth1) in SLES11 SP1 >>> On 7/8/2010 at 07:09 AM, Agblad Tore <[email protected]> wrote: > We have three more machines in the same net but with only one: eth0. > From one of these machines we can login via the .122 ip address, but not > the .115 ipaddress. Firewall rules only allowing port 22 on one interface? Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
