Hi there. I have put this question here earlier this summer and I used the proposed solution to add one more IPaddress to the same NIC. That works fine IPwise, but we need two IPaddresses for setting up two WAS Deploymnet Mgrs in same server, and it does not work on same NIC for this type of usage. We got port conflicts. In the old SLES10 it works perfect with 3 NICs used by three different WAS Deploy Mgrs. So there is a difference here, I can not find the reason.
I can config two NICs, and it 'works' the way only one usable at any time from outside. ssh two any of them locally from inside works however (if I remember my tests this summer correctly) Also it is possible to take the other interface up ifconfig eth1 up and eth0 becomes unavailable. Now we really would like this to work, the current workaround is booting a second server, but that is extra overhead, cpu and admin, we would like to get rid of. Isn't there anyone having done this ? Wew will also ask IBM how to setup a WAS with two NICs in SLES11 SP1. Besides this forum :) /Tore Agblad ___________________________________________ Tore Agblad Volvo Information Technology Infrastructure Mainframe Design & Development, Linux servers Dept 4352 DA1S SE-405 08, Gothenburg Sweden Telephone: +46-31-3233569 E-mail: [email protected] http://www.volvo.com/volvoit/global/en-gb/ -----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Jim Fujimoto Sent: den 24 augusti 2010 02:06 To: [email protected] Subject: Re: SMT Client for SLES10 SP2 Got it. Thanks. On 8/23/2010 4:40 PM, Mark Post wrote: > >>> On 8/23/2010 at 07:09 PM, Jim Fujimoto<[email protected]> wrote: >> Hello list, >> >> I just installed the SLES11 version of the SMT server on our z and would >> like to use it to put patches on our SLES10 SP2 guests. Is there a way >> for me to get a copy of the SMT client that would run on SP2? > There is no client that runs on SLES10 client systems. You pull the > clientSetup4SMT.sh script from the SMT server and run it on the client > system. It should automatically register with the SMT server. > > > Mark Post > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > -- Jim Fujimoto County of Los Angeles ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
