Well, this is  a thing I have been checking, but I haven't
been able to figure out if there is something wrong.
It looks like this:

r...@zlin0068:~> route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
131.97.122.128  0.0.0.0         255.255.255.128 U     0      0        0 eth0
131.97.122.128  0.0.0.0         255.255.255.128 U     0      0        0 eth1
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         131.97.122.129  0.0.0.0         UG    0      0        0 eth1

You can compare with a SLES10 with 3 NIC:s we have that works perfectly:

r...@zlin1016# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.220.140.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0
10.220.140.0    0.0.0.0         255.255.255.0   U     0      0        0 eth1
10.220.140.0    0.0.0.0         255.255.255.0   U     0      0        0 eth2
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         10.220.140.1    0.0.0.0         UG    0      0        0 eth2

I have checked all sort of things to compare between the SLES10 with 3 working 
NICs
and the SLES11 that does not work with both NICs.
Havent found anything, but I'm not sure if I know what I'm looking for ;)

___________________________________________
Tore Agblad
Volvo Information Technology
Infrastructure Mainframe Design & Development, Linux servers
Dept 4352  DA1S 
SE-405 08, Gothenburg  Sweden

Telephone: +46-31-3233569
E-mail: [email protected]

http://www.volvo.com/volvoit/global/en-gb/

-----Original Message-----
From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Mark Post
Sent: den 25 augusti 2010 19:28
To: [email protected]
Subject: Re: Anyone have 2 NICs on SLES11 SP1 working ?

>>> On 8/25/2010 at 03:20 AM, Agblad Tore <[email protected]> wrote: 
> Interesting it works for you, our setup is:
> 
> NICDEF 0700 TYPE QDIO DEV 3 LAN SYSTEM VSW1
> NICDEF 0710 TYPE QDIO DEV 3 LAN SYSTEM VSW1
> 
> 
> zlin0068:~ # ifconfig -a

And "route -n" ?  Running any dynamic routing daemons?


Mark Post

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to