On Tuesday, August 24, 2010 02:54:31 am you wrote:
> Hi there.
> I have put this question here earlier this summer and I used the
> proposed solution to add one more IPaddress to the same NIC.
> That works fine IPwise, but we need two IPaddresses for setting up two WAS
> Deploymnet Mgrs in same server, and it does not work on same NIC for this
> type of usage. We got port conflicts.
> In the old SLES10 it works perfect with 3 NICs used by three different
> WAS Deploy Mgrs.
> So there is a difference here, I can not find the reason.
>
> I can config two NICs, and it 'works' the way only one usable at any time
> from outside. ssh two any of them locally from inside works however (if I
> remember my tests this summer correctly)
> Also it is possible to take the other interface up
> ifconfig eth1 up
> and eth0 becomes unavailable.
We've set up multiple NICs on SLES 11.0 with no problems. Not sure if we've
done that on SP1, though. Havn't ever seen them interferring with each other.
What sort of NIC is this? Hipersocket? VSWITCH? Do you perhaps have them
using the same virtual device numbers? I would imagine that would break
things pretty badly.
- MacK.
-----
Edmund R. MacKenty
Software Architect
Rocket Software
275 Grove Street - Newton, MA 02466-2272 - USA
Tel: +1.617.614.4321
Email: [email protected]
Web: www.rocketsoftware.com
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
