On Wednesday, August 25, 2010 03:20:13 am you wrote:
> Interesting it works for you, our setup is:
>
> NICDEF 0700 TYPE QDIO DEV 3 LAN SYSTEM VSW1
> NICDEF 0710 TYPE QDIO DEV 3 LAN SYSTEM VSW1
...
Well, all that configuration stuff looks correct to me. The question is: did
that cause everything to be set up properly in the kernel? To see what the
kernel thinks the state of things are, have a look in the
/sys/bus/ccw/devices/ tree and make sure all the devices are grouped properly,
refer to the correct drivers, etc.
Also, have a look in /var/log/messages to see if the kernel is reporting any
errors when you have that problem connecting on both interfaces. There ought
to be something in there on an interface failure.
- MacK.
-----
Edmund R. MacKenty
Software Architect
Rocket Software
275 Grove Street - Newton, MA 02466-2272 - USA
Tel: +1.617.614.4321
Email: [email protected]
Web: www.rocketsoftware.com
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
