Thanks to those who responded, the issue was no vswitch defined. Moving on with the install until the next problem, thanks Matt
-----Original Message----- From: Linux on 390 Port [mailto:[email protected]] On Behalf Of Mark Post Sent: Friday, June 05, 2015 1:19 PM To: [email protected] Subject: Re: RHEL Install zvm >>> On 6/5/2015 at 01:15 PM, "Dazzo, Matt" <[email protected]> wrote: > These are the only errors I have gotten so far. > > INFO kernel: dasda:CMS1/ LXM192: dasda1 > * NOTE: To enter default or empty values press enter twice. * > Device 0.0.0600 not present, trying to clear from blacklist and resense... > Device 0.0.0600 does not exist > Device 0.0.0601 not present, trying to clear from blacklist and resense... > Device 0.0.0601 does not exist > Device 0.0.0602 not present, trying to clear from blacklist and resense... > Device 0.0.0602 does not exist > 0) redo this parameter, 1) continue, 2) restart dialog, 3) halt, 4) shell And if you do a #CP Q NIC what comes back? What about #CP Q V ? Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
