Hi Klaus, that was it. I'm happy again .-)
This coincides with the download of the up-to-date-list of satellite-transmisions from dxandys web-site. This file was in the wrong format and I used it unaware of the possible side-effects. I am wondering why this site is so popular. He (andy) wasn't very helpfull when I asked him for a manual to use his service and one saving-format option is still vdr061 (beta), which led to this problem at all. Allthough his service i still valuable, just not for the uninitiated. I don't want to blame him. thanks for your help (and your software) bye Benjamin -- Benjamin Harling mailto:[EMAIL PROTECTED] Telefon (0531) 52255 * Telefax (0531) 2506787 > Von: Klaus Schmidinger <[EMAIL PROTECTED]> > Organisation: CadSoft Computer GmbH > Datum: Sat, 29 Sep 2001 23:22:08 +0200 > An: [EMAIL PROTECTED] > Betreff: [linux-dvb] Re: second DVB-s not used anymore > > Benjamin Harling wrote: >> >> Hi, >> >> today I used the latest driver (2001.09.28) with vdr 0.9.6 with no change at >> all. Whenever I program a timer the first card is used. >> >> Do you have any idea what might have went wrong?? > > Could it be that the 'Ca' parametr of your channels is set to '1'? > > If so, see the FORMATS file for info about "Conditional Access". > > Klaus > >> >> Thanks for any help. >> >> bye, Benjamin >> -- >> Benjamin Harling >> >> mailto:[EMAIL PROTECTED] >> >> Telefon (0531) 52255 * Telefax (0531) 2506787 >> >>> Von: [EMAIL PROTECTED] (Benjamin Harling) >>> Datum: Thu, 27 Sep 2001 22:40:26 +0200 >>> An: <[EMAIL PROTECTED]> >>> Betreff: [linux-dvb] Re: second DVB-s not used anymore >>> >>> Hi Klaus, >>> >>> I did check the PrimaryDVB line. first I tried to set it to the second card >>> through vdr, result: the OSD went away (probably to the second card .-) >>> Then I set this line directly in the setup.conf-file to no avail, I even >>> tried to set it to "0". >>> >>> The funny thing is that I couldn't back up to a working system with vdr094 >>> and the older driver version which worked ok before. This leads me to the >>> impression that there must be something which had been reconfigured >>> hardware-wise like PCI-interrupts or so. I have no idea - anybody? >>> >>> Thanks anyway and I try the 096 with the latest driver. >>> >>> And by the way, thank you for making this possible at all. That goes equally >>> to the Metzler-brothers and to anybody who has contributed to this project, >>> thanks. >>> >>> bye, Benjamin >>> >>> >>> -- >>> Benjamin Harling >>> >>> mailto:[EMAIL PROTECTED] >>> >>> Telefon (0531) 52255 * Telefax (0531) 2506787 >>> >>>> Von: Klaus Schmidinger <[EMAIL PROTECTED]> >>>> Organisation: CadSoft Computer GmbH >>>> Datum: Wed, 26 Sep 2001 23:05:03 +0200 >>>> An: [EMAIL PROTECTED] >>>> Betreff: [linux-dvb] Re: second DVB-s not used anymore >>>> >>>> Benjamin Harling wrote: >>>>> >>>>> hi, >>>>> >>>>> lately I installed vdr.0.9.5 with driver from 20010923. >>>>> >>>>> Before I had vdr.0.9.4 with driver 20010822. >>>>> >>>>> Equipment is a 350 MHz K6-II with one Hauppauge DVB-S and one NOVA-Card. >>>>> Everything worked well up until I installed 0.9.5 with driver 20010923. >>>>> From >>>>> then on the NOVA-Card was still recognized but not used anymore. No more >>>>> timeshift (which worked pretty good before) and other usefull stuff. >>>>> >>>>> I backed up to the previous configuration to no avail. >>>>> Sep 24 21:21:37 amun vdr[631]: probing /dev/ost/qpskfe1 >>>>> Sep 24 21:21:37 amun vdr[631]: ERROR (dvbapi.c,3003): Bad file descriptor >>>>> Sep 24 21:21:37 amun vdr[634]: EIT processing thread started (pid=634) >>>>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qpskfe2 >>>>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qamfe2 >>>>> Sep 24 21:21:38 amun vdr[631]: found 2 video devices >>>>> Sep 24 21:21:38 amun vdr[631]: invalid DVB interface: 0 >>>> >>>> For some reason your "primary interface" setting appears to have been >>>> broken. >>>> Please check the line >>>> >>>> PrimaryDVB = X >>>> >>>> in your 'setup.conf'. If X is not '1' or '2', then please delete that line >>>> and try running VDR again. >>>>> >>>> You might also want to try the latest CVS driver version together with VDR >>>> version 0.96. >>>> >>>> Klaus > > -- > _______________________________________________________________ > > Klaus Schmidinger Phone: +49-8635-6989-10 > CadSoft Computer GmbH Fax: +49-8635-6989-40 > Hofmark 2 Email: [EMAIL PROTECTED] > D-84568 Pleiskirchen, Germany URL: www.cadsoft.de > _______________________________________________________________ > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" > as subject. > -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
