Hi, today I used the latest driver (2001.09.28) with vdr 0.9.6 with no change at all. Whenever I program a timer the first card is used.
Do you have any idea what might have went wrong?? Thanks for any help. bye, Benjamin -- Benjamin Harling mailto:[EMAIL PROTECTED] Telefon (0531) 52255 * Telefax (0531) 2506787 > Von: [EMAIL PROTECTED] (Benjamin Harling) > Datum: Thu, 27 Sep 2001 22:40:26 +0200 > An: <[EMAIL PROTECTED]> > Betreff: [linux-dvb] Re: second DVB-s not used anymore > > Hi Klaus, > > I did check the PrimaryDVB line. first I tried to set it to the second card > through vdr, result: the OSD went away (probably to the second card .-) > Then I set this line directly in the setup.conf-file to no avail, I even > tried to set it to "0". > > The funny thing is that I couldn't back up to a working system with vdr094 > and the older driver version which worked ok before. This leads me to the > impression that there must be something which had been reconfigured > hardware-wise like PCI-interrupts or so. I have no idea - anybody? > > Thanks anyway and I try the 096 with the latest driver. > > And by the way, thank you for making this possible at all. That goes equally > to the Metzler-brothers and to anybody who has contributed to this project, > thanks. > > bye, Benjamin > > > -- > Benjamin Harling > > mailto:[EMAIL PROTECTED] > > Telefon (0531) 52255 * Telefax (0531) 2506787 > >> Von: Klaus Schmidinger <[EMAIL PROTECTED]> >> Organisation: CadSoft Computer GmbH >> Datum: Wed, 26 Sep 2001 23:05:03 +0200 >> An: [EMAIL PROTECTED] >> Betreff: [linux-dvb] Re: second DVB-s not used anymore >> >> Benjamin Harling wrote: >>> >>> hi, >>> >>> lately I installed vdr.0.9.5 with driver from 20010923. >>> >>> Before I had vdr.0.9.4 with driver 20010822. >>> >>> Equipment is a 350 MHz K6-II with one Hauppauge DVB-S and one NOVA-Card. >>> Everything worked well up until I installed 0.9.5 with driver 20010923. From >>> then on the NOVA-Card was still recognized but not used anymore. No more >>> timeshift (which worked pretty good before) and other usefull stuff. >>> >>> I backed up to the previous configuration to no avail. >>> Sep 24 21:21:37 amun vdr[631]: probing /dev/ost/qpskfe1 >>> Sep 24 21:21:37 amun vdr[631]: ERROR (dvbapi.c,3003): Bad file descriptor >>> Sep 24 21:21:37 amun vdr[634]: EIT processing thread started (pid=634) >>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qpskfe2 >>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qamfe2 >>> Sep 24 21:21:38 amun vdr[631]: found 2 video devices >>> Sep 24 21:21:38 amun vdr[631]: invalid DVB interface: 0 >> >> For some reason your "primary interface" setting appears to have been broken. >> Please check the line >> >> PrimaryDVB = X >> >> in your 'setup.conf'. If X is not '1' or '2', then please delete that line >> and try running VDR again. >>> >> You might also want to try the latest CVS driver version together with VDR >> version 0.96. >> >> Klaus >> -- >> _______________________________________________________________ >> >> Klaus Schmidinger Phone: +49-8635-6989-10 >> CadSoft Computer GmbH Fax: +49-8635-6989-40 >> Hofmark 2 Email: [EMAIL PROTECTED] >> D-84568 Pleiskirchen, Germany URL: www.cadsoft.de >> _______________________________________________________________ >> >> >> -- >> Info: >> To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" >> as subject. >> > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" > as subject. > -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
