Benjamin Harling wrote: > > Hi, > > today I used the latest driver (2001.09.28) with vdr 0.9.6 with no change at > all. Whenever I program a timer the first card is used. > > Do you have any idea what might have went wrong??
Could it be that the 'Ca' parametr of your channels is set to '1'? If so, see the FORMATS file for info about "Conditional Access". Klaus > > Thanks for any help. > > bye, Benjamin > -- > Benjamin Harling > > mailto:[EMAIL PROTECTED] > > Telefon (0531) 52255 * Telefax (0531) 2506787 > > > Von: [EMAIL PROTECTED] (Benjamin Harling) > > Datum: Thu, 27 Sep 2001 22:40:26 +0200 > > An: <[EMAIL PROTECTED]> > > Betreff: [linux-dvb] Re: second DVB-s not used anymore > > > > Hi Klaus, > > > > I did check the PrimaryDVB line. first I tried to set it to the second card > > through vdr, result: the OSD went away (probably to the second card .-) > > Then I set this line directly in the setup.conf-file to no avail, I even > > tried to set it to "0". > > > > The funny thing is that I couldn't back up to a working system with vdr094 > > and the older driver version which worked ok before. This leads me to the > > impression that there must be something which had been reconfigured > > hardware-wise like PCI-interrupts or so. I have no idea - anybody? > > > > Thanks anyway and I try the 096 with the latest driver. > > > > And by the way, thank you for making this possible at all. That goes equally > > to the Metzler-brothers and to anybody who has contributed to this project, > > thanks. > > > > bye, Benjamin > > > > > > -- > > Benjamin Harling > > > > mailto:[EMAIL PROTECTED] > > > > Telefon (0531) 52255 * Telefax (0531) 2506787 > > > >> Von: Klaus Schmidinger <[EMAIL PROTECTED]> > >> Organisation: CadSoft Computer GmbH > >> Datum: Wed, 26 Sep 2001 23:05:03 +0200 > >> An: [EMAIL PROTECTED] > >> Betreff: [linux-dvb] Re: second DVB-s not used anymore > >> > >> Benjamin Harling wrote: > >>> > >>> hi, > >>> > >>> lately I installed vdr.0.9.5 with driver from 20010923. > >>> > >>> Before I had vdr.0.9.4 with driver 20010822. > >>> > >>> Equipment is a 350 MHz K6-II with one Hauppauge DVB-S and one NOVA-Card. > >>> Everything worked well up until I installed 0.9.5 with driver 20010923. From > >>> then on the NOVA-Card was still recognized but not used anymore. No more > >>> timeshift (which worked pretty good before) and other usefull stuff. > >>> > >>> I backed up to the previous configuration to no avail. > >>> Sep 24 21:21:37 amun vdr[631]: probing /dev/ost/qpskfe1 > >>> Sep 24 21:21:37 amun vdr[631]: ERROR (dvbapi.c,3003): Bad file descriptor > >>> Sep 24 21:21:37 amun vdr[634]: EIT processing thread started (pid=634) > >>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qpskfe2 > >>> Sep 24 21:21:38 amun vdr[631]: probing /dev/ost/qamfe2 > >>> Sep 24 21:21:38 amun vdr[631]: found 2 video devices > >>> Sep 24 21:21:38 amun vdr[631]: invalid DVB interface: 0 > >> > >> For some reason your "primary interface" setting appears to have been broken. > >> Please check the line > >> > >> PrimaryDVB = X > >> > >> in your 'setup.conf'. If X is not '1' or '2', then please delete that line > >> and try running VDR again. > >>> > >> You might also want to try the latest CVS driver version together with VDR > >> version 0.96. > >> > >> Klaus -- _______________________________________________________________ Klaus Schmidinger Phone: +49-8635-6989-10 CadSoft Computer GmbH Fax: +49-8635-6989-40 Hofmark 2 Email: [EMAIL PROTECTED] D-84568 Pleiskirchen, Germany URL: www.cadsoft.de _______________________________________________________________ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
