I had a DVB-S card (Siemens rev 1.3) running fine in a Pentium III system at 866 MHz CPU clock. Due to a hardware failure I had to exchange the motherboard, so the system is now an AMD Athlon XP 1900+, running at a clock rate of 1600 MHz (also tested with 1200 MHz, same result).
The problem I'm having is that now the driver gives me an error message when loading, and there is no picture coming after loading the driver. Here's what /var/log/messages says: Feb 15 18:01:14 fox kernel: i2c-core.o: i2c core module Feb 15 18:01:14 fox kernel: Linux video capture interface: v1.00 Feb 15 18:01:14 fox kernel: i2c-core.o: driver VES1893 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver VES1820 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver L64781 DVB demodulator registered. Feb 15 18:01:14 fox kernel: init_SP8870: Feb 15 18:01:14 fox kernel: i2c-core.o: driver SP8870 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver tda8083 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver stv0299 DVB demodulator registered. Feb 15 18:01:14 fox kernel: i2c-core.o: driver i2c TV tuner driver registered. Feb 15 18:01:14 fox kernel: saa7146_core.o: saa7146(1): bus:0, rev:1, mem:0xd082a000. Feb 15 18:01:14 fox kernel: SP8870: no SP8870 found ... Feb 15 18:01:14 fox kernel: i2c-core.o: adapter saa7146(1) registered as adapter 0. Feb 15 18:01:22 fox kernel: wait-for-debi-done maxwait: 500000 Feb 15 18:01:22 fox kernel: dvb: debi test in bootarm() failed: 00000000 != 10325476 Feb 15 18:01:22 fox kernel: dvb0: AV7110 - firm 398bc940, rtsl b380c940, vid 00000000, app 54761032 Feb 15 18:01:22 fox kernel: dvb: 1 dvb(s) found! I guess the lines Feb 15 18:01:22 fox kernel: wait-for-debi-done maxwait: 500000 Feb 15 18:01:22 fox kernel: dvb: debi test in bootarm() failed: 00000000 != 10325476 are the ones that indicate the error, but I'm afraid I don't know what to do in order to get around this. I can rule out a hardware failure of the DVB-S card, because I have replaced it with another one and got the same error. I would appreciate any hints about what could be wrong here. Klaus -- _______________________________________________________________ Klaus Schmidinger Phone: +49-8635-6989-10 CadSoft Computer GmbH Fax: +49-8635-6989-40 Hofmark 2 Email: [EMAIL PROTECTED] D-84568 Pleiskirchen, Germany URL: www.cadsoft.de _______________________________________________________________ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
