Rolf Siebrecht wrote: > > Hi! > > On Fri, 15 Feb 2002, Klaus Schmidinger wrote: > > I had a DVB-S card (Siemens rev 1.3) running fine in a Pentium III system > > at 866 MHz CPU clock. Due to a hardware failure I had to exchange the > > motherboard, so the system is now an AMD Athlon XP 1900+, running at > > a clock rate of 1600 MHz (also tested with 1200 MHz, same result). > > Type of chipset, FSB clock, PCI bus clock, and things... are of more > importance here. > > > [..] > > I guess the lines > > > > Feb 15 18:01:22 fox kernel: wait-for-debi-done maxwait: 500000 > > Feb 15 18:01:22 fox kernel: dvb: debi test in bootarm() failed: 00000000 != >10325476 > > > > are the ones that indicate the error, but I'm afraid I don't know what to do in > > order to get around this. > > Has your DVB card got an IRQ? > What kernel version? A 2.4 kernel should mention something about the IRQ > in syslog. > > Else: > - PCI DMA settings of chipset > - Burst length setting of DEBI DMA port of SAA7146 > > Bye, > Rolf
Nevermind, there seems to have been a problem with the BIOS setup. I did a complete CMOS reset, and now it works. However, my LIRC remote control doesn't work any more :-( The strange thing is that the 'xmode2' program that comes with LIRC works just fine, but neither the 'lircd' nor 'irrecord' appear to work. I'm afraid I have no clue what this could be... Klaus -- _______________________________________________________________ Klaus Schmidinger Phone: +49-8635-6989-10 CadSoft Computer GmbH Fax: +49-8635-6989-40 Hofmark 2 Email: [EMAIL PROTECTED] D-84568 Pleiskirchen, Germany URL: www.cadsoft.de _______________________________________________________________ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
