According to Jan Janak: While burning my CPU.
>
> We are trying to setup linux internet gateway, this gateway is connected
> to packet radio net via
> dual port ( 1k2 a 9k6 ) Baycom USCC card. The kernel is 2.0.36 with ax
> utils 2.1.42a and SCC driver 2.4c
>
> The problem is, that SCC driver still freezes the system. When this
> happens, it is not possible to do anything, only cold reset.
>
> Second PC connected to the same ethernet segment receives sometimes
> bogus size packets after gateway crash.
>
> I tried to define DISABLE_ALL_INTS ( i found it in some message to
> linux-hams from dl1bke )
> but it doesn't help.
>
> When I recompile the kernel without scc driver, it seems to be stable.
>
> I also noticed, that there are many RX errors on device SCC0, but I
> don't think this is the reason of crash.
>
> Does anyone have similar problem ? Or is there any possibility how to
> fix it ?
Not without a more detailed description of what is happening and when,
accompanyed by your config files, it sounds very much like an address
problem/conflict to me, but without example noone can tell you what to do.
Rxerrors are normaly caused by a wrongly set dcd or the use of software
dcd.
>
> vy 73! Honza, OK2JPR
> e-mail: [EMAIL PROTECTED]
>
--
Regards Richard.
[EMAIL PROTECTED]
