> The problem is, that SCC driver still freezes the system. When this
> happens, it is not possible to do anything, only cold reset.
Are you using the KISS TNC emulation (kissattach on /dev/scc#) or
network devices (set up with ifconfig scc#)? Could you try the
network device mode if you are currently using the KISS TNC
emulation?
> Second PC connected to the same ethernet segment receives sometimes
> bogus size packets after gateway crash.
Oops, are you sure that you do not have any Interrupt or I/O-Port
collisions?
> I also noticed, that there are many RX errors on device SCC0,
This is normal.
> Does anyone have similar problem ? Or is there any possibility how to
> fix it?
Complete freezes are AFAIK quite rare, my own problems went away after I
cleaned the contacts of the RAM modules and applied some contact spray
to the ISA slots... Everything's extremely stable ever since.
73,
Joerg Reuter http://poboxes.com/jreuter/
And I make my way to where the warm scent of soil fills the evening air.
Everything is waiting quietly out there.... (Anne Clark)
PGP signature
