> From: Ichiro Hieda <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Cc: "Jose R. Marte A." <[EMAIL PROTECTED]>
> Subject: Re: new libax25/tools/apps <> any version xfbbd-7.0??
> Date: Friday, October 01, 1999 1:59 AM
>
> Hi Jose and all,
>
> In article <[EMAIL PROTECTED]>,
> [EMAIL PROTECTED] ("Jose R. Marte A.") wrote:
> > This package is glibc2.1 [libc6] kernel 2.2.5-15
> > the xfbbd in a single port TELNET works very well but it doesn't run
> when I
> > do
> > the configuration of the ports of ax25, when I run the configuration
> and
> > later
> > I run the xfbbd in daemon mode, immediately it gives a error UNKNOWN
> RETURN
> > VALUE 5
> > and it does a reboot, I connected from the console to the
> LinuxNode-0.3.0
> > that it doesn't have to do anything with the xfbbd and the xfbb it
> makes
> > the same, make reboot
> > again and again until I disconnect myself of the LinuxNode.
> >
> > The xfbbd sends me this message all time.
> > while I am connected to the LinuxNode
>
> As I had problem early with xfbbd when enabling a telnet port, I have not
> been using telnet for xfbbd for long. In my feeling, telnet doesn't work
> properly if xfbbd attaches some numbers of ax25 ports. For internal
> connection, I have been running kissnetd for more than a year and new
> kissnetd coming with ax25-tools-0.0.5 is working perfect, too.
>
> I don't know much about "LinuxNode". What I have been using is ax25d, as
> the frontend for DX Spider, that is running simultaneously with xfbbd.
> The new ax25d in ax25-tools-0.0.5 is also working fine. I have never
> experienced the problem that you have with the LinuxNode.
>
> I have succeeded to compile xfbbd 7.01b which was just released a couple
> of days ago, but the binary doesn't start, does nothing and returns
> immediately. I would like to see what is wrong this weekend.
> --
> Ichiro Hieda
> [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> http://ocean.kz.tsukuba.ac.jp/~je1sgh/
Ok Ichiro,
and yes I run the ax25d, mheardd, netromd, xfbbd, etc.
I have 4 ports in the linux box 2 ports in VHF/HF
1 port of Netrom in the xfbb Port.sys and 1 port TELNET
for forward on internet.
And I downloaded the new one xfbb-7.01b1, code source, but
not yet I have played it I am working at the moment in the xfbb-7.01a1.
I found the little problem that I have for a 2 or 3 week
that up to now it had not taken into account.
But today I am very tired I go to analyze it tomorrow, the because the xfbb
makes that in RH6.0 and it doesn't make it in RH5.2 and others.
thank you for your comments.
73's Jos� (hi8gn) <> http://www.hi8gn.dynip.com/
------
73's Jose (hi8gn)
Email : [EMAIL PROTECTED]
Url : http://www.hi8gn.dynip.com/
