On Wed, 8 Dec 1999, Richard Adams wrote:
> Well i cant ever say i have noticed the problem to start with, on all the
> machines i look after, 3 or them have scc cards i have never seen the
> modules count get any higher then the count of connects + the dependancies,
> ax25/netrom/bpqether, so thats 3 to start with and one for every connect,
> right.? all i see is the count increase by oner per connect and decrease by
> one when the stn disconnects.
The module count should be exactly the same as the number of lines in
/pro/net/ax25.
The problem however _only_ affects incoming AX.25 connections and even
then only incoming _user_ AX.25 connections, not for example NET/ROM
interlink connections. Please check that one more time.
> Now could it be that this problem has to do with using mkiss+kissattach, i
> use ifconfig to up my interfaces, please dont see this as a stupid
> question, there must be a reason for some folks having the problem you are
> so kindly addressing, its just that it does not show up here.
Interface type shouldn't have anything to do with it.
> > One quick test to do is checking /proc/net/ax25 (or "Links" in node) to
> > see if Rcv-Q never drops under 32 for incoming connects. If it does
> > without my patch then I'm confused...
>
> I would have to get my act sorted out first before i can check that, as i
> have installed other netutils for 2.3.x kernels and sommat seems to be very
> different with netstat and friends.
Just "cat /proc/net/ax25" and see if the second last figure on the
line never drops below 32 during the connection.
--
Tomi Manninen Internet: [EMAIL PROTECTED]
OH2BNS AX.25: [EMAIL PROTECTED]
KP20ME04 Amprnet: [EMAIL PROTECTED]
