>On Thu, Jan 27, 2000 at 03:04:54PM +0100, Mitja Bezget wrote:
>You do not need to specify PTT in this case, the sound modem doesn't
>mind if you don't have PTT.
>
>Perhaps the mixer settings on the receiving sound card are wrong?
>Either the levels are wrong or the line in is not selected for recording.
>Something like "smmixer s=line" (on SB16) should fix that. That would
>be why smdiag doesn't show anything.
Yeah, I run Soundmodem on an SBPro, and I found that the default
mixer settings for that card came out a little screwy. Or it was set
to receive input on the mike input jack rather than the line input jack
-- something like that.
Is soundmodem staying in the kernel, accessing the hardware
directly -- or is it going to eventually use some kind of
drivers for the sound card?
